FELT F65X, model 2019
Fork: Felt UHC Advanced carbon
Gearing: Shimano 105, 11 speeds
Derailleur: Shimano 105
Derailleur: Shimano 105, 11 speeds
Cassette: Shimano, 11-28 teeth
Chain: Shimano, 11 gears
Cranks: FSA Gossamer BB386, 46/36 (47cm - 165mm, 50cm - 170mm, 53cm - 172.5mm, 55 / 60cm - 175mm)
Head composition: FSA No.38 / 42, 1.125 "-1.5"
Stem: Felt CXR SuperLite, +/- 7 °, (47 / 53cm - 90mm, 55cm - 100mm, 57cm - 110mm, 60cm - 120mm)
Handlebars: Felt CXR SuperLite, 31.mm (47 / 50cm - 420 / 450mm, 53 / 60cm - 440 / 470mm)
Brakes: TRP SpyreC disc, 160 / 140mm
Brake levers: Shimano 105
Hubs: Felt R3
Rims: Felt CxR3
Tip: 2.0mm steel
Tires: Schwalbe X-One Evo, 700c x 33c
Seatpost : Felt CxR3, 300mm
Seat: Prologo Nago in X10 T2.0
Colors: matt black / charcoal gray
Weight: 9.6 kg
Gears | 2x11 |
Groupset | Shimano 105 |
product ID | 77405 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews