Cannondale SystemSix Hi-Mod Ultegra Di2 SGG 2019 road bike
The results from the wind tunnel speak clearly. In front of you is the fastest road bike today. Loaded with modern technology, ready to win the most prestigious races.
Frame: SystemSix, Ballistec Hi-MOD Carbon, Di2 ready, SAVE, BB30, flat mount, Speed Release thru-axle
Fork: SystemSix, Ballistec Carbon, SAVE, Speed Release thru-axle
Cranks: Cannondale HollowGram Si, BB30 w / Power2Max NG Eco Power Meter and Vision rings, 52/36 teeth
Center composition: Cannondale Alloy PressFit30
Derailleur: Shimano Ultegra Di2
Derailleur: Shimano Ultegra Di2
Gear levers: Shimano Ultegra Di2 Hydro disc, 2x11
Cassette: Shimano, 11 speed, 11-30 teeth
Chain: Shimano, 11 gears
Brakes: Shimano Ultegra Di2 Hydro discs, RT800 discs 160/140 mm
Brake levers: Shimano Ultegra Di2 Hydro disc,
Rims: HollowGram KNOT64 Rim, Carbon, 20/24 holes, profile height 64 mm, inner width 21 mm, tubeless ready
Hubs: HollowGram KNOT, 12x100 mm front, 12x142 mm rear, centerlock disc mounting, encapsulated bearings, DT Swiss mechanism
Wires: DT Swiss Aerolite, straight pull
Tires: In ittoria Rubino Pre Speed 23c, 700x26 mm
Handlebars: Cannondale KNOT SystemBar, carbon, 8 ° pitch adjust
Stem: Cannondale KNOT SystemStem, alloy w / cable cover
Head composition: Tapered, 1-1 / 8 "upper, 1-1 / 4" lower bearing
Saddle: prologue Dimension, Tirox skis
Seatpost: Cannondale KNOT, carbon, 330mm
Color: Black / gray / yellow
Extra: Pre-installed Power2Max ™ NG Eco power meter, Garmin Mount holder
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano Ultegra |
product ID | 66729 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews