Cannondale SystemSix Carbon Ultegra
Fork: Ballistec Carbon, 1-1 / 8 "- 1-1 / 4" steerer, 12x100mm Speed Release thru-axle, flat mount disk, 55mm offset (47-51cm) 45mm offset (54-62cm)
Cranks: HollowGram, BB30 w / OPI Spidering, 52/36
Middle composition: Cannondale Alloy PressFit30
Derailleur: Shimano Ultegra GS
Derailleur: Shimano, Brage-on
Gear: Shimano Ultegra hydro disc, 2x11
Cassette: Shimano 105, 11-30, 11-speed
Chain: Shimano HG601, 11-speed
Brakes: Shimano Ultegra hydro disc, 160 / 140mm RT81 rotors
Brake levers: Shimano Ultegra hydro disc
Rims: Vision SC55 Carbon Clincher 12x100 front, SC55 Carbon Clincher 12x142 rear
Hubs: (F) Vision Sealed Cartridge Mushroom 12x100 / (R) Vision Sealed Cartridge Mushroom, 12x142
Spikes: vision, Aero bladed
Tires: Vittoria Rubino Pro Speed, 700 x 26mm (23c)
Pedals: no
Handlebars: Vis ion Metron 4D Flat, UD Carbon
Stem: Vision Trimax OS, 2014 alloy, 3D Forged
Head composition: Tapered, 1-1 / 8 "upper, 1-1 / 4" lower bearing
Saddle: Prologue Dimension STN GDR, steel rails
Seatpost : HollowGram 60 KNOT Carbon, 330mm
Extras: Cannondale Wheel Sensor
Model year | 2020 |
Gears | 2x11 |
Groupset | Shimano Ultegra, Shimano 105 |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 96607 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews