Cannondale SuperSix Evo Tiagra 2017 road bike
These goods are unavailable
Similar products
You can try these searches
Ballistec carbon frame and fork, Shimano Tiagra 2x10, low weight, stiffness and aerodynamics.
The Cannnodale Supe Six Evo Tiagra has a Ballistec carbon frame that has an asymmetric BB30 center and the improved carbon fiber routing gives the bike extraordinary liveliness and perfectly transfers all the power to the asphalt. At the same time, the frame is maximally comfortable thanks to the Speed Save system. Cannondale Super Six Evo Tiagra is equipped with Shimano Tiagra components in combination with 2x10 speed. FSA cranks are semi-compat 52/36 teeth. The system-integrated design makes the Super Six Evo Tiagra a light, stiff, great-handling machine for entry-level racers and performance riders alike.
Maximum stiffness for explosive acceleration
The asymmetric BB30 hub, flattened Delta seat tube and improved Ballistec carbon fiber routing deliver great power transfer into the sprint.
Surprising comfort, better cornering and driving at speed
The refined SPEED SAVE suspension system absorbs shocks and keeps the wheels in contact with the road even during aggressive descents, fast sprints and also provides surprising comfort.
aero tube profile for better efficiency
The cut aero profile of the tubes and the reduced position of the bottle on the frame reduce aerodynamic resistance by 6 watts. Free speed boost.
great shifting
An absolute rocket in the descents thanks to the razor-sharp shifting that the geometry of the wheels provides along with the stiffness of the frame, but at the same time with its compliance in the right places. Sufficient disc brake power makes the EVO even faster.
ultra light
The Ballistec Carbon construction and system-integrated design make the EVO light, but at the same time durable enough that we give it a lifetime warranty.
Model year: 2017
Frame: New SuperSix EVO, BallisTec Carbon, SPEED SAVE, Di2 Compatible, PressFit BB30
Fork: New SuperSix EVO, BallisTec Carbon, SPEED SAVE, integrated crown race, 1-1/8" to 1-1/4" steerer
Cranks: FSA Omega, BB30a, 52/36
Center composition: FSA PressFit 30
Shifters: Shimano Tiagra
Cassette: Shimano HG500, 11-28, 10-speed.
Chain: FSA CN-910, 10-speed
Derailleur: Shimano Tiagra, braze-on
Derailleur: Shimano Tiagra
Bullets: Formula (F) RB-51, (R) RB-5711
Pedals: N/A
Brakes: Tektro R741, dual pivot, cartridge pad
Stem: Cannondale C3, 6061 Alloy, 31.8, 6 deg.
Head composition: SuperSix EVO, 1-1/4" lower bearing, 25mm top cap
Brake levers: Shimano Tiagra
Rims: RD 2.0, 28H
Wires: DT Swiss Champion
Tires: Schwalbe Lugano, folding, 700x25c
Saddle: Cannondale Stage Ergo w/ Steel Rails
Seatpost: Cannondale C3, 6061 Alloy, 25.4x350mm
Sizes: 52,54,56,58,60
Color: Cerulean Blue w/ Volt and Magnesium White - Gloss (CER)
Product details
Model year | 2017 |
Groupset | Shimano Tiagra |
Gears | 2x10 |
Brakes | Road rim brakes |
Material | carbon fiber |
product ID | 31918 |
Horské, mestské a krosové
Veľkosť | Výška jazdca |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Veľkosť | Výška jazdca |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Veľkosť | Výška jazdca |
---|---|
Univerzálna | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews