Cannondale Super Six Evo Hi-Mod Ultegra 2017 Road Bike, SHOWCASE
Frame: SuperSix EVO, Ballistec Hi-MOD Carbon, Di2 Compatible, SPEED SAVE, PressFit BB30
Fork: SuperSix EVO, SPEED SAVE, Ballistec full Carbon, 1-1 / 8" to 1-1 / 4" steerer, integrated crown race. SuperSix EVO, SPEED SAVE, Ballistec full Carbon, 1-1 / 8" to 1- 1 / 4" steerer, integrated crown race.
Cranks: Cannondale HollowGram Si, BB30, w/ OPI Spidering, 52/36
Center composition: Cannondale Alloy PressFit30
Derailleur: Shimano Ultegra
Derailleur: Shimano, Brage-on
Shifters: Shimano Ultegra
Cassette: Shimano, 11-28, 11-speed
Chain: Shimano HG701, 11-speed
Brakes: Shimano Ultegra
Rims: Cannondale HollowGram Si Carbon Clincher, 17mm inner, 35mm deep
Hubs: Cannondale HollowGram, sealed bearing, 18h (F), 24h (RR)
Wires: Sandvik double butted 1.8 / 2.0
Tires: Schwalbe ONE, folding, 700x25c
Stem: Cannondale C1 Ultralight, 2014 Alloy, 31.8, 6 deg. w/integrated Garmin Mount
Head composition: SuperSix EVO, 1-1 / 4" lower bearing, 25mm carbon top cap
Saddle: Cannondale SAVE Carbon, 25.4x350mm
Seat post : Fizik Arione
Weight: 7.0 kg
Model year | 2017 |
Gears | 2x11 |
Groupset | Shimano Dura-Ace, Shimano Ultegra |
product ID | 75462 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews