Rock Machine Blizzard 90 - 27 (test), model 2019
This bike is ridden and was used as a test bike. For this reason, it is discounted. By confirming the order, the customer declares that he has been informed of this fact and is aware that this is not a new bicycle.
Frame: Alu 6061.T6 Multibutted BF-1604
Stroke (L/Z mm): 170/160 mm
Fork: Rock Shox Lyrik RC, Tapered, 15 mm Boost
Suspension/damping system: Solo Air/Charger Damper
Rear suspension: Rock Shox Super Deluxe RC3 DebonAir
Cranks with converters: SRAM GX Eagle Boost 32T
Rear derailleur: SRAM GX Eagle X-Horizon
Shifters: SRAM GX Eagle Trigger Shifter
Cassette: SRAM XG-1275-12 Eagle 10-50T
Chain: SRAM GX Eagle
Brakes: TRP Slate G-Spec HD-M820 hydraulic 180/180 mm, 4-pistons
Middle composition: SRAM BB PF92
Headstock : FSA Orbit 1.5E ZS No.57B
Front hub: Bitex 15×110 mm
Rear hub: Bitex 12×148 mm
Rims: WTB STP i29 32H
Tip : Sapim Leader Black
Tires/tubes: WTB Vigilante TCS LFR 27.5×2.3"
Stem: Race Face Aeffect 35 mm
Handlebars: Race Face Aeffect 35 mm riser
Grips: ONE MTB Lock-on
Seat post : Race Face Aeffect 125 mm Dropped Post
Saddle: RM Peak Race
Number of gears: 1×12
Weight: 14.4 kg / 19" (L)
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM GX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 88677 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews