Mondraker mountain bike FOXY CARBON RR 29, yellow / orange, 2019
-12% Mondraker Raze Carbon RR 29 bike, deep purple/light blue
7,199.99 €
-12%
RRP 8,199 €
-10% Mondraker Raze Carbon R 29 bike, racing silver/orange
from 4,499 €
-10%
RRP 6,799 €
New model -5% Rock Machine Whizz FS I 90 AXS 29 bike, panama yellow
5,199 €
-5%
RRP 5,499 €
frame: foxy 29 stealth air full carbon, zero suspension system, 150mm stroke, forward geometry, aluminum csc upper link with carbon bridge, boost 12x148mm rear axle, tapered head tube, 73mm bsa center assembly, designed for single converter only, hhg internal inner guide ropes, enduro max encapsulated bearings, shock absorber protector, ISCG 05, custom frame protection. including geometry adjustment kit
fork: fox 36 29 float fit grip2 Evol factory Kashima surface treatment, 160mm, tapered post, 15x110mm fixed axle, offset 44mm. settings: high and low speed compression, high and low speed bounce, air preload
head assembly: ONOFF titanium tapered for 1-1-8 "and 1-1-2" head tube diameters, acb encapsulated bearings, upper 41.8x30. 5x8x45ºx45º, bottom 51.9x40x8x45ºx45º
derailleur: SRAM x01 eagle, type 3 roller bearing clutch system for constant chain tensioning, latch cage lock, 1x12s, x-actuation 1: 1
gearing: modules sram trigger gx eagle, 12s, x-actuation 1: 1
brake levers: SRAM code r, tool - free adjustment of the lever position
brakes: SRAM code RSC, oversized 4 piston caliper, Centerline 200mm one-piece disc, 6 hole mounting, steel-backed metal sintered plates - SRAM code RSC, oversized 4 piston caliper, Centerline 200mm one-piece disc, 6 hole mounting, steel -backed metal sintered plates
cranks and converters: sram x01 carbon eagle modules, 12 speeds, boost, oak axle, direct mount chain ring, size sm: 170mm, size l-xl: 175mm
middle composition: SRAM oak bsa, encapsulated bearings, 73mm
handlebars: ONOFF Stoic carbon, lifting: 25mm, width: 780mm, 9º bending backwards, 5º bending upwards, diameter 35mm
stem : ONOFF Stoic fg length 30mm, 6061 forged alloy, diameter 35mm
seatpost: ONOFF pija dropper, diameter 31,6mm, size s: 337x100m, size m 387x125mm, size l-xl 425x150mm
saddle: sdg fly mtn, pu foam, cr-mo skis, cordura reinforced sidewalls
front hub: dt 350, 15x110mm, disc mounting 6 holes
rear hub: dt 350, 12x148mm, blade mounting 6 holes, xd walnut
chain: new modules sram eagle, 12 speed
cartridge: sram xg-1275 modules, 10-50 teeth, 12 speed
wires: dt competition, straight pull
rims: dt swiss e1700 spline 29, 30mm internal width, tubeless ready, 28 wires
tires: front: Maxxis minion DHF 29x2.4 wt, tubeless ready, 3c rear: maxx terra compound, exo protection, 60tpi, folding heel - Maxxis aggresor 29x2.3, tubeles with ready, dual compound, exo protection, 6pi, folding heel
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Gears | 1x12 |
| Groupset | SRAM X01 |
| product ID | 80319 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Sale -30% Leatt MTB HydraDri 4.0 MTB waterproof jacket, black
from 118 €
-30%
RRP 199 €
Sale -23% POC Joint VPD Air elbow protectors, uranium black
from 58.99 €
-23%
RRP 95.99 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews