Mondraker Foxy 29" black / orange / grey, 2021
frame: Foxy 29 6061 Alloy Stealth Evo, hydroformed tubing, Zero Suspension System, 150mm travel, Forward Geometry, one piece Monoblock upper link, Boost 12x148mm rear axle, 73mm BSA bottom bracket, dedicated 1x DRIVETRAIN design, telescopic seatpost internal routing, MAX capacity sealed bearings, ISCG 05
fork: Fox 36 29 Float FIT GRIP EVOL Rhythm, 160mm, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: sweep adjust compression, low-speed rebound, air preload
head composition: ONOFF Saturn tapered for 1-1 / 8 to 1-1 / 2 head tube, ACB sealed bearings, top 41x30.2x7x45x45, bottom 51.9x40x8x45x45
derailleur: Sram SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1
shifting: Sram Trigger SX Eagle, 12s, X-actuation 1:1
brake levers: Sram G2 R, tool-free reach adjust
cranks and derailleurs: Sram SX Eagle, Boost, DUB axle, Direct Mount chain ring, S / M size: 170mm, L / XL size: 175mm
center composition: Sram DUB BSA, sealed bearings, 73mm
handlebars: ONOFF Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 780mm, 9 backsweep, 5º upsweep, 31.8mm Barbore ONOFF Twin, 1lock-on, 135mm
stem : ONOFF Sulfur FG 30mm 0, 6061 forged alloy, 31.8mm barbora
seatpost: ONOFF pija dropper internal, diameter 31.6mm, S size: 337x100mm, M size 387x125mm, L size: 425x150mm, XL size: 465x170mm
saddle: SDG BEL-AIR 3.0, LPU foam, steel rails
front hub: Formula DC711, Boost 15x110mm, sealed bearings, IS 6 bolts
rear hub: Formula MST148S-4SB, Boost 12x148mm, sealed bearings, IS 6 bolts
chain: Sram SX Eagle, 12s, Powerlock
cassette: Sram PG -1210, 11-50T, 12s
tip: CN round stainless steel
rim: MDK-EP1 29 TLR ASY, asymmetrical rim, 30mm internal width, tubeless ready, 32 Spokes
tire: Maxxis Minion DHF 29x2.5 WT, tubeless ready, 3C MAXX TERRA compound, EXO + protection, 120TPI, folding bead
Model year | 2021 |
Gears | 1x12 |
Groupset | SRAM SX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 114479 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews