Mondraker F-Podium RR, model, 2020
-32% BMC Fourstroke THREE 29 bike, sparkling dark petrol/sand
from 3,399 €
-32%
RRP 4,999 €
Clearance -19% Orbea OIZ M-TEAM XTR 29 bike, digital lavender/carbon raw
6,499 €
-19%
RRP 7,999 €
Fork: Fox 32 29 Float FIT4 EVOL Step Cast Factory Kashima, 100mm, tapered steerer tube, 15x110mm Boost axle, remote lockout, offset 44mm. Settings: lockout, micro-adjustment compression at low-speed, rebound, air preload
Muffler: Fox Float PCB SV EVOL Factory Kashima, 185x47,5mm. Settings: 2 position remote compression (open / lock), low-speed rebound, air preload. Trunnion top mount, 22.2x10mm bottom bushings
Head composition: Onoff Saturn tapered for 1-1 / 8 ”to 1-1 / 2” head tube, ACB sealed bearings, top 41.8x30.5x8x45 ° x45 °, bottom 51.9x40x8x45 ° x45 °
Stem: Mondraker Chrono Carbon, 6061 T6 Alloy, 31.8mm barbore, rise: +/- 5 °, length: sizes S / M: 50mm, size L / XL: 60mm
Handlebars: Onoff Helium Carbon 0.2, rise: 4.8mm, width: 760mm, 9 ° backsweep, 0 ° upsweep, 31.8mm barbore
Grips: Onoff Desert, 1lock-on, 135mm sizes: S / ML / XL
Seatpost : Onoff Helium Carbon 0-R, diameter 31.6mm, length 400mm
Saddle: Physicist Antares R5 K: IUM
Front brake: Shimano XTR M9100, MT900 160mm CenterLock rotor, resin pads
Rear brake: Shimano XTR M9100, MT900 160mm CenterLock rotor, resin pads
Brake levers: Shimano XTR, ergonomic antiskid lever with servo wave, tool less reach adjust
Rims: DT Swiss XRC 1200 Spline Carbon, 25mm internal width, tubeless ready, 28 spokes
Spikes: DT Aerolite and Aero comp, straight pull
Front hub: DT 240, 15x110mm, CL
Rear hub: DT 240, 12x148mm, CL, Microspline freehub
Front tire: Maxxis Rekon Race 29x2.25, EXO protection, tubeless ready, 120TPI, folding bead
Back cover: Maxxis Rekon Race 29x2.25, EXO protection, tubeless ready, 120TPI, folding bead
Cranks: Rotor Inpower with powermeter, 12s, Boost axle, Direct Mount chain ring, S size: 170mm, M / L / XL size: 175mm
Converters: 34T, CNC-machined alloy
Center composition: Rotor BSA 30mm, sealed bearings, 73mm
Chain: Shimano XTR CS-M9100, 12p
Derailleur: Shimano XTR RD-M9100, SGS, Shadow Plus, 12s
Gearing: Shimano XTR SL-9100, Rapid Fire Plus, 12s
Cassette: Shimano XTR CS-M9100 10-51T Hyperglide +, 12p
Weight: 10.210 kg (without pedals)
Carbon frame
Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
| Model year | 2020 |
| Gears | 1x12 |
| Groupset | Shimano XTR, Shimano XT |
| Material | carbon fiber |
| Brakes | Hydraulic disc brakes |
| product ID | 88518 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews