Mondraker F-Podium R, model 2020
frame: F-Podium 29 Stealth Air Full Carbon, ZERO suspension system, stroke 100mm
fork: Fox 32 Step Cast Float 29 Remote FIT4 Evol Factory Kashima Boost, stroke 100mm
head composition: Onoff Saturn tapered ACB
derailleur: SRAM X01 Eagle X-Horizon Type3 1x12 speed
gear: SRAM GX Trigger right 12 speeds
Brake levers: Sram Level TLM
cranks and transducers: Sram X1 Carbon Eagle, 34 teeth
middle composition: Sram DUB BSA
handlebars: Onoff Helium Carbon 0.2, width 760mm
representative: Mondraker XC, slope -5º
seatpost: Onoff Helium Carbon 0-R, diameter 31.6, length 400mm
saddle: Fizik Antares R7
front hub: DT Boost, axle 15x110mm
rear hub: DT Boost, axle 12X148mm, XD walnut
chain: Sram GX Eagle 12 speed
cartridge: Sram Eagle XG1275 10-50 teeth, 12 speed
tip: DT Competition Straight pull
rims: Dt Swiss XR1501 Spline One 29, rim width 25mm, entwined set
tires: Maxxis Rekon Race Exo TR 29, width 2.25
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM X1, SRAM GX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 106672 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews