Mondraker F-Podium Carbon DC R 29 bike, carbon/black/racing silver
Mondraker F-Podium Carbon DC R 29 bike
Frame |
F-Podium 29 Stealth Air Full Carbon, XCO Optimized Zero Suspension System, 115 mm, XC Forward Geometry, Carbon Monoblock upper link, BSA bottom bracket, tapered head tube, HHG internal cable routing, dedicated 1X drivetrain design, Boost 12x148 mm rear axle, shock mudguard, postmount rear brake mount.
|
Fork |
Rockshox SID Ultimate RL 29, 120 mm, Charger Race day, Debonair, tapered steerer tube, Boost 15x110 mm axle, 35 mm tapered aluminum stanchions, offset 44 mm. Settings: OneLoc, Low-speed rebound, air preload
|
Shifting |
Sram Trigger GX Eagle, 12-speed, X-Actuation 1:1
|
Derailleur |
Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12, X-Actuation 1:1
|
Cassette |
Sram XG-1275, 10-50T, 12-speed
|
Chain |
Sram GX Eagle, 12-speed, Powerlock
|
Cranks |
Sram X1 Carbon Eagle, Boost, DUB axle, Direct mount chain ring, S: 170 mm, M/L/XL: 175 mm
|
Brake levers |
Sram Level TL, Direct Link actuation, tooled reach adjust, lever pivot bushings
|
Rims |
Mavic Crossmax Carbon XL R 29, 30 mm internal width, hookless, tubeless ready, 24 spokes
|
Front hub |
Mavic, Boost 15x110 mm, IS 6 bolts
|
Rear hub |
Mavic, Boost 12x148 mm, ID360 Ratched system, IS 6 bolts, XD freehub
|
Spokes |
Mavic straight pull double butted, contactless lacing
|
Tires |
Maxxis Rekon Race 29x2.4, EXO protection, TR, 120TPI, folding
|
Seat post |
Onoff Pija dropper internal, Ø 31.6 mm, S: 337x100 mm, M/L/XL: 387x125 mm
|
Saddle |
Fizik Antares R7
|
Stem |
MDK, 6061 T6 Alloy, Ø 31.8 mm barbore, rise +/-5º, S/M: 50 mm, L: 60 mm, XL: 70 mm
|
Handlebars |
Onoff Sulfur 0.2, double butted 6061 alloy, rise: 4.8 mm, width 760 mm, 9º backsweep, 0º upsweep, 31.8 mm barbore
|
Headset |
Acros AZX-239 R1 Block Lock, ZS44/28.6 top, ZS56/40 bottom
|
Bottom bracket |
SRAM DUB BSA, sealed bearings, 73 mm
|
Model year | 2022 |
Gears | 1x12 |
Groupset | Other |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 120 mm |
Shock | Air |
Rear travel | 115 mm |
product ID | 191895 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews