Lapierre Zesty AM 527, model 2016
Frame: ZESTY XM 27.5 "CARBON OST + 120mm Rear Travel
Fork: ROCKSHOX REVELATION RL SOLO AIR 27.5 "130mm 15QR
Muffler: ROCKSHOX MONARCH RT3 RELAY 184x44mm / Mechanical: ROCKSHOX MONARCH RT 184x44mm DBHVI
Derailleur: SHIMANO XT FDM8025ED6X E-TYPE
Derailleur: SHIMANO XT RDM8000GS 11-Speed
Gear: SHIMANO XT SLM8000 2x11-Speed Ispec 2
Front brake: SHIMANO HYDRAULIC XT BRM8000 BLACK
Rear brake: SHIMANO HYDRAULIC XT BRM8000 BLACK
Converter: SHIMANO XT FCM8000CX66 36x26 170mm (S) / 175mm (M, L, XL)
Head composition: FSA ORBIT 1.5E ZS NO.57ECF + 5mm TOP CAP
Center composition: SHIMANO SMBB7141A PRESSFIT
Cassette: SHIMANO XT CSM8000140 11x40 11-Speed
Handlebars: LAPIERRE Nico Vouilloz Signature Alu6061 W: 740mm W: 15mm Ø: 31.8mm
Stem: EASTON EA70 6 ° Ø: 31.8mm L: 60mm (S, M, L) / 70mm (XL)
Seatpost: KIND SHOCK LEV INTEGRA Ø: 31.6mm L: 392mm Travel: 125mm
Saddle: SDG DUSTER LP Custom
Front tire: CHWALBE NOBBY NIC PERF TS 27.5x2.25
Rear tire: SCHWALBE NOBBY NIC PERF TS 27.5x2.25
Spliced wheels: RACE FACE AEFFECT 27.5 "15x100 / 12x142 + LAQR-12-E Thru Axle
Weight: 12.4 Kg / 12.7 Kg
Model year | 2016 |
Gears | 2x11 |
Groupset | Shimano XT |
Material | carbon fiber |
product ID | 25059 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews