Lapierre Zesty AM 4.0 29 ", model 2020
Wheel size: 29 "
Frame: Zest AM FIT SUPREME 6 140mm travel PRESSFIT, BOOST, METRIC, THRU AXLE
Fork: RockShox REVELATION RC MOTION CONTROL BOOST 140mm (29)
SRAM NX EAGLE 12SPD gearbox
Cranks: SRAM NX EAGLE BOOST148 OAK 12SPD 32T (M, L, XL / 29)
Cassette: SRAM PG1210 EAGLE 11-50 12spd
Chain: SRAM SX EAGLE
Brakes: SRAM GUIDE T
Gearbox : SRAM NX EAGLE 12SPD
Head composition: FSA ORBIT ZERO STACK + ANGLESET 0.5 °
Handlebars: LP 6061DB 760m (S, M), 780 (L, XL), 15MM RISE, 31.8 BAR BORE
Grips: Lapierrre Grips "FIT"
Stem: LP FULL CNC 0 ° 35MM (S, M, L), 45MM (XL)
Seatpost : LP DROPPER by JD 80 (S), 100 (M), 130 (L, XL)
Saddle: Lapierre CrMo by Velo
Front hub: Lapierre bY FASTACE DF813, BOOST 15x110, 32H
Rear hub: Lapierre bY FASTACE DR813, 4 SEALED BEARINGS, BOOST 12x148, 32H
Rims: MACH 1 Trucks 30 622 * 30 (29.5 ")
Tires: MAXXIS HIGH ROLLER II WIDE TRAIL 29x2.5 (M, L, XL) / MAXXIS HIGH ROLLER II minion DHR 29x2.4 WT (M, L, XL)
Pedals: NW 91K steel cage
Wheels: CENTERLINE Rounded 200/180
Muffler: RockShox DELUXE SELECT + 205X60 / 57.5 Debonaire
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX, SRAM SX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 88362 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews