Lapierre XR 729 Ultimate, model 2018
Frame XR 29 "FULL CARBON 100mm travel PRESSFIT, BOOST, METRIC, THRU AXLE
Fork ROCKSHOX SID RL 29 "BOOST SOLO AIR100MM + ONELOC
Shock absorber ROCKSHOX DELUXE RL REMOTE 190X40 DEBONAIR MM
SRAM X01 EAGLE TYPE 2.1 CARBON 12s derailleur
Derailleur -
SRAM GX EAGLE gears
SRAM LEVEL TL front brake
Rear brake SRAM LEVEL TL
Converter SRAM X1 CARBON EAGLE DIRECT MOUNT BOOST XSYNC 32T 170mm (S), 175mm (M, L, XL)
Head assembly FSA ORBIT 1.5Z SC NO.57SC
Cassette SRAM XG 1275 12s 10-50T
SRAM GX EAGLE WITH POWER LOCK chain
Handlebars RACEFACE NEXT CARBON W: 720mm?: 31.8mm
Stem LAPIERRE ST148A 7050 ALLOY 7 ° ?: 31.8mm L: 60mm (S, M) / 70mm (L, XL)
Seatpost LAPIERRE ST66-TC CARBON?: 31.6mm L: 400mm
Saddle FIZIK TUNDRA M5
Grips PRE FOAM GRIPS
Rear hub SRAM LEVEL TL
Front tire 2.25 MAXXIS ARDENT / 2.20 IKON FOLDING SKINWALL 60TPI TLR
Rear tire 2.25 MAXXIS ARDENT / 2.20 IKON FOLDING SKINWALL 60TPI TLR
MAVIC CROSSMAX ELITE 29 tangled wheels
Weight 11.5
Front stroke 100mm
Rear stroke 100mm
Category MTB FULLY
Pedals FP917
Center composition SRAM PRESS FIT MTB (89 / 91.5)
Stroke 100-125
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM X1, SRAM GX |
Material | carbon fiber |
product ID | 49830 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews