Lapierre DH World Champion ULTIMATE, model 2018
Fork: ROCKSHOX BOXXER WORLD CUP 27.5 SOLO AIR 200MM
Muffler: ROCKSHOX VIVID COIL R2C 240x76
Derailleur: SRAM X01 DH 7s TYPE 2.1 SHORT CAGE
Cranks: SRAM X01 DH CARBON 165mm XSYNC 36T + E-13 LG1 + GUIDE
Center composition: SRAM PRESS FIT DH (104.5 / 107)
Cassette: SRAM XG 795 7SPD 10-24T DH
Chain: SRAM PCX1
Brakes: SRAM CODE RSC
Wheels: SRAM CENTERLINE 200mm / 200mm
Gearing: SRAM X0 DH 7s
Head composition: FSA ORBIT 1.5Z SC NO.57SC
Handlebars: RACE FACE ATLAS 35 HB 20x800MM
Grips: LAPIERRE DD34 LOCK ON
Stem: RACE FACE ATLAS DIRECT MOUNT: 35 L: 50mm
Seatpost: RACE FACE CHESTER 31.6x325MM
Saddle: SDG CIRCUIT DH
Front hub: FORMULA DHL92 20x110 32H
Rear hub: FORMULA DHG-1501 SHIMANO DRIVER 150x12 32H
Rims: E-13 LG1 + EXALITE 30C 32H, 110x20mm / LG1 + EXALITE 30C 32H, 12x150mm
Tires: 27.5x2.4 HIGH ROLLER II DUAL PLY 3C
Pedals: FP917
Model year | 2018 |
Gears | 1x7 |
Groupset | SRAM X01 |
Material | carbon fiber |
product ID | 49860 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews