Kellys Tyke 50, model 2016 TESTBIKE
frame size S (17 ") / M (19") / L (21 ")
fork ROCK SHOX Reba RL (27.5), 120mm, Solo Air / OneLoc Remote Lockout / Maxle Lite 15mm thru axle
rear silencer FOX Float Performance, air / PCB / 3-Position Lever: Open-Medium-Firm (184x44mm)
main composition FSA 1.5 integrated
middle composition SHIMANO BB70
handles SHIMANO Deore XT M785 Hollowtech II (38x24) - length 170mm (S), 175mm (M - L)
SHIMANO SLX SL-M670-B I-spec Rapidfire Plus
SHIMANO SLX M676-D derailleur (direct mount)
SHIMANO Deore XT M781 inverter
number of transfers 20
cassette pinion SHIMANO CS-HG50-10 (11-36)
KMC X10L chain (110 links)
brakes SHIMANO SLX M675 Hydraulic Disc
brake discs front 180mm / rear 160mm Center Lock
SHIMANO SLX BL-M675-B brake levers
hubs SHIMANO Deore M618 Disc Center Lock (32 holes)
fixed axle ROCK SHOX Maxle Lite - front 15x100mm / rear 12x142mm
KLS Cartel Disc 584x21 rims (32 holes)
string stainless steel black
tires SCHWALBE Racing Ralph Performance 57-584 (27.5x2.25) folding
stem KLS Expert - diam 28.6mm / bar bore 31.8mm / 7 ° / length 70mm (S), 80mm (M), 90mm (L)
handlebars KLS Master RiseBar - diam 31.8mm / width 680mm (S), 700mm (M), 720mm (L)
handles KLS Advancer LockOn gel
seatpost KLS Master - diam 31.6mm / length 350mm (S), 400mm (M - L)
saddle KLS Falcon
pedals SHIMANO M505 SPD (footprints)
The bike has a ride of about 150km.
Model year | 2016 |
Gears | 2x10 |
Groupset | Shimano XT, Shimano SLX, Shimano Deore |
Material | aluminium |
product ID | 15788 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews