GT Force Carbon PRO LE 29 bicycle, blue
GT Force Carbon PRO LE 29 bike
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Frame |
Force Carbon 29” Frame, High Pivot LTS Suspension, 160 mm Travel, Tube in Tube Cable Routing, BSA 73 mm, Boost 12x148 mm Thru-Axle, 230x65 mm Shock, ISCG05
|
Fork |
RockShox ZEB Ultimate, 170mm, 15x110mm Boost, 44mm Offset
|
Shock |
RockShox Super Deluxe Ultimate, 230x65 mm
|
Derailleur |
SRAM X01 Eagle
|
Cassette |
SRAM XG-1275, 10-52T
|
Chain |
SRAM GX Eagle, 12-speed
|
Cranks |
Truvativ Descendant 7K, Oak, 32T
|
Brakes |
SRAM Code RSC Hydro Disc, 220/200 mm Centerline Rotors
|
Brake levers |
SRAM Code RSC Hydro Disc
|
Rims |
WTB KOM Trail i30, Tubeless ready
|
Hubs |
Formula, 15x110 mm, SRAM MTH746, 12x148 mm
|
Tires |
front: Maxxis Assegai, 29 x 2.5”, 3C MaxxTerra, EXO+ Casing, TR
rear: Maxxis Minion DHR II, 29 x 2.4”, 3C MaxxTerra, EXO+ Casing, TR |
Seat post |
Tranz X +Rad, Ø 31.6 mm, Adjustable Height (S: 150 mm, M: 170 mm, L/XL: 200 mm)
|
Saddle |
Fabric Scoop Shallow Sport
|
Handlebars |
GT Alloy Riser Bar, 780mm wide, 30mm rise
|
Headset |
FSA No. 57
|
Pedals |
without pedals
|
Shift levers |
SRAM GX Eagle, 12-speed
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM GX |
Colour | blue |
Material | carbon fiber |
Wheel material | Aluminium |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 170 mm |
Shock | Air |
Rear travel | 160 mm |
Telescopic seat post | yes |
product ID | 140501 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews