GT Force 29 Pro 2020 BUR mountain bike, SAMPLE
This is a bicycle from the exhibition. There are small abrasions on the bike. The only piece in size M.
Frame: All New Force Alloy 29 "frame, 150mm travel, BSA 73mm, LockR Pivots, Tapered Head Tube, Boost 12x148 Thru-Axle, 185x55mm Trunnion Shock Mount, ISCG05
Fork: Fox Float Performance Elite 36, 170mm, Grip2 Damper, 15x110mm, tapered steer, 44mm offset
Muffler: Fox Float X2 Performance, 185x55mm, Metric Trunnion, 2Pos-Adj, Rebound and Compression Adjust
Cranks: SRAM Eagle, 30T, 170mm (SL) 175mm (XL)
Gear levers: SRAM GX Eagle, 12-speed
Cassette: SRAM XG-1275, GX Eagle, 10-50, 12-speed
Chain: SRAM NX Eagle, 12-speed
Derailleur: SRAM GX Eagle
Brakes: SRAM G2 RSC hydro disc, 200 / 180mm Centerline rotors
Stem: Alloy, 45mm
Head Composition: FSA NO.42, Semi Integrated, Sealed Bearing, Tapered
Handlebars: Spank Oozy 780 Trail, 30mm rise, 780mm width
Brake levers: SRAM G2 RSC
Wires: Stainless Steel, 14g
Tires: Maxxis Minion DHF, 29 x 2.5 ", 3C Compound, EXO +, tubeless readyMaxxis Minion DHR II, 29 x 2.4", 3C Compound, EXO +, tubeless ready
Saddle: Fabric Scoop Shallow Elite, cr-mo rails
Seatpost: KS Lev Si dropper, Southpaw Lever, 31.6mm, 125mm (S, M), 150mm (L, XL)
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 99994 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews