GT Force 29 Expert, model 2020
Fork: Fox Float Performance 36, 170 mm, GRIP Damper, 3Pos, Kabolt, 44 mm offset
Muffler: Fox Performance Float DPX2 185x55 mm, 3Pos-Adj, Metric Trunnion
Cranks: SRAM Eagle, 30T, 170 mm (SL) 175 mm (XL)
Derailleur: SRAM NX Eagle
Gearing: SRAM NX Eagle, 12-speed
Cassette: SRAM XG-1275, GX Eagle, 10-50, 12-speed
Chain: SRAM NX Eagle, 12-speed
Brakes: TRP G-Spec Trail S hydro disc, 203 / 180mm rotors
Brake levers: TRP G-Spec Trail S
Hubs: Formula 15x110 / Formula 12x148
Rims: Stan's NoTubes Flow S1, 32h, tubeless ready
Spikes: Stainless Steel, 14 g
Tires: Maxxis Minion DHF, 29 x 2.5 ", 3C Compound, EXO +, tubeless ready / Maxxis Minion DHR II, 29 x 2.4", 3C Compound, EXO +, tubeless ready
Handlebars: Spank Oozy 780 Trail, 30mm rise, 780mm width
Stem: Alloy, 45mm
Head Composition: FSA NO.42, Semi Integrated, Sealed Bearing, Tapered
Saddle: Fabric Scoop Shallow, steel rails
Seatpost: GT Dropkick Dropper Post, 31.6, Internal Routing, 125 mm (S, M), 150 mm (L, XL)
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM GX, SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 99701 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews