GT Force 27.5 Sport 2018 Gloss Neon Yellow mountain bike
The GT Force 27.5 Sport is an all mountain machine that is fast enough for the World Enduro Series races and light enough for all-day riding.
Thanks to the progressive geometry of the frame, which has a longer frame tube and a shorter stem, the rider's position on the bike is balanced and the wheel is easy to control. Perfect contact with the surface is guaranteed by the Angle Optimized Suspension suspension.
The GT Force 27.5 Sport mountain bike will be appreciated by everyone who loves riding downhill but wants to cross the whole mountain - all on one universal bike.
Frame: GT Force 6069 Hydroformed Aluminum Frame, 150mm Travel AOS Suspension System, 1 1/8 "-1 1/2" Integrated Head Tube, and 12x142mm Maxl dropouts
Forks: RockShox Yari RC Boost, 160mm stroke
Muffler: RockShox Monarch R Air Shock
Cranks: Race Face Ride 30 teeth
Middle composition: Race face
Gear levers: Shimano Deore, Rapid Fire
Cartridge: Sunrace CSMS3, 10 speeds, 11-42 teeth
Chain: KMC X10-1
Derailleur: N / A
Derailleur: Shimano Deore Shadow Plus, SGS
Rims: WTB STP i29, Tubeless Compatible, 32 holes
Hubs: (front) All Terra Alloy Centerlock Disc, 15x110mm fixed axle, (rear) Shimano Deore Centerlock Disc, 12x142 fixed axle
Pedals: N / A
Brakes: Shimano Deore M6000 203 / 180mm Centerlock disc
Stem: Race Face Chester, length 40 mm
Handlebars: Race Face Chester, width and 780 mm
Brake levers: Shimano Deore
Wires: 14 / 15G stainless steel
Tires : Schwalbe Magic Mary Bikepark 27.5x2.35 "
Saddle: WTB Silverado Sport
Seatpost: All Terra Dropper Post
Head composition: FSA Orbit C-40 -ACB
Model year | 2018 |
Gears | 2x10 |
Groupset | Shimano Deore |
product ID | 57344 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews