GT Force 27.5 Carbon Pro 2019 mountain bike
Uncompromising enduro machine mounted on 27.5 "wheels, carbon frame with 150 mm stroke with LTS suspension system, FOX 160 mm fork and Sram Eagle set.
Frame: All New Force Carbon, 150mm rear wheel travel, Carbon front / Alloy rear frame, Boost 148 rear spacing, ISCG05 mounts, lockr pivots, metric trunnion shock mounts, coil shock compatible
Fork: Fox Float Factory 36, 160mm, Kashima, FIT4 Damper, 3-Pos Adj, 15x110mm, tapered steerer
Muffler: Fox Float Factory DPX2 EVOL, 185x55mm, metric trunnion
Cranks: Truvativ Descendant 7K, Oak, 32T
Middle composition: SRAM Oak BSA
Derailleur: SRAM X01 Eagle
Gear levers: SRAM GX Eagle, 1x12
Cassette: SRAM X01 Eagle, 10-50, 12 -sPEED
Chain: SRAM GX Eagle, 12-speed
Brakes: SRAM Guide RS hydro disc, 200 / 180mm Centerline Rotors
Hubs: All Terra Alloy Disc 15x110 front, 12x148 rear, 6 Bolt
Wires: Stainless Steel, 14g
Tires: Schwalbe Magic Mary Performance, 27.5 x 2.35 ", tubeless ready
Handlebars: Race Face Aeffect, 35mm clamp, 20mm rise, 9 ° sweep, 5 ° rise, 780mm
Stem: Race Face Aeffect, 6061 Alloy, 35mm clamp, 40mm
Head composition: FSA Orbit C-40-ACB
Saddle: Fabric Scoop Shallow Sport
Seatpost: KS LEV Ci Carbon dropper, Southpaw remote, 31.6, 100mm (S) 125mm (M), 150mm (L / XL)
Model year | 2019 |
Gears | 1x12 |
Groupset | SRAM X01, SRAM GX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 73323 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews