Giant Trance Advanced Pro 29 2, model 2020
Fork: FOX 34 Rhythm, stroke 130 mm, GRIP damping, Boost fixed axle 110x15 mm, OverDrive post
Muffler: FOX Float DPS Performance
Handlebars: Giant Contact TR 35, 780x35 mm, 20 mm increase
Stem: Giant Contact SL 35
Seatpost: Giant Contact Switch, telescopic, 30.9 mm
Saddle: Giant Contact (Neutral)
Gearing: SRAM NX Eagle, gears 1x12
Derailleur: SRAM NX Eagle
Brakes: SRAM guide T
Brake levers: SRAM guide T
Cassette: SRAM NX Eagle, 11-50 teeth
Chain: SRAM NX Eagle
Cranks: Truvativ Descendant 6k OAK, 30-tooth transducer
Center composition: SRAM OAK, press fit
Rims: Giant TRX-1 29 WheelSystem, carbon rims
Hubs: Giant TRX-1 29 WheelSystem
Tip: Giant TRX-1 29 WheelSystem
Tires : front Maxxis Minion DHF EXO TR, 29x2.3 / rear Maxxis Minion DHR II EXO TR, 29x2.3 (tubeless)
Model year | 2020 |
Gears | 1x12 |
Groupset | SRAM NX |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 92036 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews