Ghost SLAMR 2.9 AL - Jet Black / Urban Gray, model 2020
Material: Aluminum
Frame: SLAMR AL
Fork: RockShox Judy Silver TK 130 mm
Derailleur: Shimano SLX RD-M7100 12-S
Crankshafts: Shimano FC-MT610 32T
Center composition: Shimano BB-MT800
Cassette: Shimano SLX CS -M7100 10-51
Chain: Shimano CN-M7100
Brakes: Shimano BR-MT500 180 mm Disc
Handlebars: Ground Fiftyone Race 780 mm Rise 15 mm Dia. 31.8 mm
Grips: Production Privee
Stem: G round Fiftyone Dia. 31.8 mm
Saddle: Ergon SM Sport
Front hub: Fastace DF813 15 x 110 mm
Rear hub: Fastace DR2116B 12 x 148 mm
Wheels: Shimano SM-RT56 180 mm
Shock absorber: RockShox Deluxe Select + RT 130 mm
Heel : FRHG0058
Rims: Rodi Tryp 622x30 mm 32H
Tires: WTB Ranger 29 x 2.25
Number of transfers: 12
Maximum load: 120 kg
Model year | 2020 |
Gears | 1x12 |
Groupset | Shimano SLX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 88181 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews