FELT Decree FRD black, model 2019
Fork: Rock Shox Pike RCT3, air, Boost 110x15
Shock: Rock Shox Super Deluxe RCT Trunnion
Stroke: 150/140 mm
Shifting: Sram XX1 Eagle, 12 speeds
Derailleur: Sram XX1 Eagle, 12 speeds
Cassette: Sram XG1295, 12 speeds, 10-50 teeth
Cranks: Sram XX1 Eagle, 34 teeth, (S - 170mm, M/XL - 175mm)
Headstock: FSA DX, 1.125"-1.5", semi-integrated
Stem: Race Face Turbine, +/-6°, (S/M - 40mm, L/X - 50mm)
Handlebars: Race Face Next carbon, 800 mm
Brakes: Sram Guide Ultimate, 180/160 mm
Wheels: Race Face Next-R
Tires: Maxxis Minion DHF TLR, 27.5x2.35"
Seatpost: Rock Shox Reverb Stealth, telescopic, 30.9, (travel: S - 100mm, M/L - 125mm, XL - 150m)
Seat: WTB SL8 carbon
Weight: 12.92 kg
Gears | 1x12 |
Groupset | SRAM XX1, SRAM XX |
product ID | 77331 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews