Corratec Inside Link Carbon 10Hz EAGLE 2018
Mountain bike also suitable for XC trails.
Frame: Corratec Inside Link Carbon 10Hz Material: Carbon UD 800T
Vidlica: Rockshox RS1 Solo Air 100mm The new RS-1 impresses with the Charger 2 ™ shok system for an unrivaled traction in small strikes and a clearly defined lockout.Suspension travel: 100mmMaterial: AlloyOneLoc-Remote compatible Charger 2 shock absorbers
Rear silencer: Rockshox Monarch R LuftdämpferZugstufe externRapid Recovery Suspension travel: 80mm
Brakes: Magura MT8frontSize brake disc: 180 mm
Stem: ZZYZX 6 Series 3D 6 Degree Material: Alloy
Handlebars: ZZYZX Carbon Flat Top Bar 720mm Material: Carbon
Seat: Corratec Carbon Rail Material: Black / Yellow / Pink
Seatpost: ZZYZX Carbon Twin Bolt 31.6mm Outer diameter: 31.6mmMaterial: Carbon
Converter: SRAM X1 Eagle 34 Number of chainrings; Ratio: 1s; 34
Cassette: SRAM Eagle Black 10-50 Number of pinions; Ratio: 12s; 10-12-14-16-18-21-24-28-32-36-42-50
Derailleur: SRAM XX1 Eagle black
Gear: SRAM XX1 Eagle Trigger black
Rims: DRC 27.5 DiscRim height: 16mmRim outer diameter: 29.00zollWidth outside: 28mmNumber of spokes: 32Type of tires: clincher with tubesMaterial: Alloy
Tires: Continental Race King 2.2Width: 55mmType of tires: clincher with tubes
Converter gears: 1s; 34
Cassette gears: 12s; 10-12-14-16-18-21-24-28-32-36-42-50
Fork stroke: 100 mm
Rear shock stroke: 80 mm
Brake Disc Size: 180 mm front160 mm rear
Model year | 2018 |
Gears | 1x12 |
Groupset | SRAM XX1, SRAM XX, SRAM X1 |
Material | carbon fiber |
product ID | 52434 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews