Cannondale Scalpel-Si Carbon 3 2018 BBQ mountain bike
These goods are unavailable
Similar products
You can try these searches
Brand new and redesigned Scalpel-Si. Made for XC.
Short is effective
The Scalpel-Si and its asymmetrically shifted Ai drive deliver an ultra-short rear structure, resulting in maximum traction and uncompromising driving performance. The Ai package also includes high tire clearance, full 2x compatibility and a stiffer and firmer rear wheel.
Low weight
With the Ballistec carbon construction and System Integration approach, the Scalpel Si is the lightest and toughest all-suspension XC in the world.
No redundant pins
Transversely stiffer and lighter than the traditional rear structure with pins. Zero-Pivot flexible rear struts are a hallmark of Scalpel.
New modern geometry
Laid and stable for hard descents and at the same time still fast and agile on technical exits. The new modern Scalpel-Si geometry brings you the best of both worlds.
Stud instead of studs
The expandable fixed axis of the LOCKR system creates the strongest possible connection. Stiffer and lighter. No need for special tools.
Full control over cables
Trivia makes a whole. The new wiring harness inserts allow you to use the configuration you need. It also anchors everything in place, so your perfect cable loops always stay perfect.
Model year: 2018
Wheel size: 29 "
Frame: Scalpel-Si, 100mm, BallisTec Carbon, Zero Pivot seatstay, PF30, 1.5 Si head tube, Ai Offset
Fork: Lefty 2.0, 100mm, XLR Isolated Damper Technology with XC + tune and XLoc Full Sprint remote, 55mm offset
Silencer: RockShox Monarch XX, 100mm, Full Sprint remote
Cranks: Cannondale Si, BB30, 32t Ai SpideRing
Middle composition: Cannondale Alloy PressFit30
Gear levers: Shimano XT, 11-speed
Cassette: Shimano XT, 11-42, 11-speed
Chain: Shimano HG601, 11-speed
Derailleur: N / A
Derailleur: Shimano XTR Shadow Plus, 11-speed
Rims: Stans Notubes ZTR CREST, 32 hole, tubeless ready, 23mm ID
Ammunition : CZero Straight Pull, Lefty 60 front, 39-point engagement rear, 142x12, 28h (Ai Offset dish - Rear)
Pedals: N / A
Brakes: Shimano XT, 160 / 160mm
Stem: Cannondale C1, 6061 Alloy, 1.5 ", 31.8, -5 deg.
Head composition: Cannondale HeadShok Si
Handlebars: Cannondale CZero flat, Carbon, 760mm
Brake levers: Shimano XT
Wires: Grand Forza Double Butted (Ai Offset dish - Rear)
Tires: Schwalbe Racing Ralph EVO Snakeskin, 29x2.25 ", folding, tubeless ready
Saddle: Prologo Zero II STN
Seatpost: Cannondale C2 Carbon, Micro Adjust, 31.6x350mm (S, M) 400mm (L, X)
Product details
Model year | 2018 |
Groupset | Shimano XTR, Shimano XT |
Gears | 1x11 |
Brakes | Disc brakes - hydraulic |
Material | carbon fiber |
product ID | 58446 |
Horské, mestské a krosové
Veľkosť | Výška jazdca |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Veľkosť | Výška jazdca |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Veľkosť | Výška jazdca |
---|---|
Univerzálna | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews