Cannondale Jekyll 1 29 bike, green
Cannondale Jekyll 1 29 bike
The Cannondale Jekyll 1 is engineeredfor downhill driving. Every part of it was designed with speed in mind. Every element of it has been designed so that you feel secure and supported even on the sharpest descents.High Pivot - the higher position of the main pivot ensures the absorption of even the roughest impacts. The unique four-pin solution guarantees smooth braking, reliable traction and direct energy transfer when pedaling.
Guidler - guide and chain tensioner in one. A very smart solution that eliminates the chain drag caused by the movement of the rear structure during suspension. This way, the rider gets smooth pedaling even when riding in very broken terrain.
Gravity Cavity - the shock absorber is located inside the frame tube. Its low placement contributes to riding stability, immediate steering response and, last but not least, provides an exceptional appearance of the bike itself. In the lower part, the muffler is protected from dirt and impacts by a cover that does not retain water at the same time.
Level and quality of equipmenthelp
Riding in difficult terrain, or even racing will not be a problem for this bike. Quality equipment without compromise, which will be especially usefull for adventure enthusiasts and regular racers.
Specification
Frame |
All-New, 165 mm travel, Carbon, Proportional Response Tuned, Guidler idler pulley/chainguide, BSA 73, ISCG05, tapered head tube, Ai Offset
|
Fork |
Fox Float Factory 38, 170 mm, 15x110 mm thru-axle, tapered steerer, 44 mm offset
|
Rear shock |
Fox Float Factory X2, 205 x 65mm Metric Trunnion, Air, Adjustable High Speed/Low Speed Compression, High Speed/Low Speed Rebound
|
Shifting |
SRAM GX Eagle, 12-speed
|
Derailleur |
SRAM GX Eagle Lunar
|
Cassette |
SRAM XG-1275, GX Eagle, 10-52T, 12-speed
|
Chain |
SRAM GX Eagle
|
Cranks |
SRAM X1 Eagle B148 CL55, 30T
|
Brakes |
SRAM Code RSC hydraulic disc, 220/200 mm CenterLine rotors
|
Rims |
WTB KOM Trail i30 TCS, 32h, tubeless ready
|
Front hub |
(F) Formula, 15x110 mm thru-axle
(R) SRAM MTH 700, 12x148mm, XD Driver |
Spokes |
DT Swiss Factory J-Bend
|
Tires |
(F) Maxxis Assegai, 29 x 2.5", Dual compound, EXO+ puncture protection, tubeless ready
(R) Maxxis Minion DHR II, 29 x 2.4", EXO+, tubeless ready |
Seatpost |
Cannondale DownLow Dropper w/ Matchmaker lever, 31.6, 125 mm (S), 150 mm (M), 170 mm (L-XL)
|
Saddle |
Fabric Scoop Shallow Elite, hollow cro-mo rails
|
Stem |
FSA Grid 35, 35 mm
|
Handlebars |
Cannondale 1 Riser, Carbon, 30 mm rise, 8° sweep, 5° rise, 780 mm
|
Headset |
Integrated Sealed Bearing, Tapered
|
Product details
Sex | Men, Unisex |
Model year | 2022 |
Groupset | SRAM X1, SRAM GX |
Gears | 1x12 |
Brakes | Hydraulic disc brakes |
Wheel diameter | 29" |
Fork travel | 170 mm |
Material | carbon fiber |
Size | S, M, L, XL |
Colour | green |
Fork | Air |
Shock | Air |
Wheel material | Aluminium |
Rear travel | 165 mm |
product ID | 138159 |
Horské, mestské a krosové
Veľkosť | Výška jazdca |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Veľkosť | Výška jazdca |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Veľkosť | Výška jazdca |
---|---|
Univerzálna | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
Rating 0/5
Similar products
You may find these products complementary
Why shop with us?
Find out what makes us specialWhy shop with us?
More about shopping900 000+ orders
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
Unique customer service
We are available via email, online chat, phone or in person at our MTBIKER stores.
We actively support the cycling community in Slovakia
Thanks to your order we can support cycling development.
Secure payment methods
The payment process is safe and we offer you a wide range of options.
Loyalty system
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
MTBIKER centre and showroom
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
comment Reviews
There are currently no reviews