Rock Machine Blizz CRB 70-29, red / black
FRAME: Carbon Mid Modulus BF-FB-02, Trail Advanced Geometry, Shark Spine EVO 29er, BB92 Press Fit, Tapered Head Tube, Boost 148x12, Disc Brake Post Mount, Replaceable RD Hanger, Inner Cable Routing, E-Type Mount, Adjust . seatpost ready
HEAD COMPOSITION: FSA DX Pro2, 1-1 / 8 "x1.5"
FORK : RockShox Reba Motion Control RL, Tapered, SoloAir, 15x110 axle, Lockout, 120mm travel
SIZES: 15.0 "(S), 17.0" (M), 19.0 "(L), 21.0" (XL)
NUMBER OF TRANSFERS: 1x12
GEAR LEVER: SHIMANO SLX SL-M7100-IR RapidFire Plus, 12-speed
REAR CONVERTER: SHIMANO SLX RD-M7100 Shadow Plus
CRANKSHAFT: SHIMANO SLX FC-M7100 Hollowtech II, 34T
CASSETTE: SHIMANO SLX CS-M7100-12, 10-51T
CENTER COMPOSITION: SHIMANO BB-MT500 PressFit, shell 41 / 92mm
CHAIN: SHIMANO DEORE CN-M6100
HANDLES: Race Face Ride, 20mm rise, 760mm, 35mm
INTRODUCTION: Race Face Ride Alloy, 31.8xE60 / 80mm, ± 6 °
HANDLES: ONE1 VL-G1661D2N, Lock-On
BRAKES: SHIMANO SLX BL-M7100 / BR-M7100, 180/160 rotor, hydraulic disc brake, metallic pads
SADDLE: WTB Volt Sport
SEAT : ONE1 Alloy, MT171, dropper post 125 & 150 & 170mm travel, 30.9x440mm & 480mm
FRONT HUB: SHIMANO SLX HB-M7110-B, 28H, CENTER LOCK, 15x110mm THRU Type AXLE
REAR HUB: SHIMANO SLX FH-M7110-B, 28H, CENTER LOCK, 12x148mm THRU Type AXLE
RIMS: WTB ST i23, 28H
TIRES / SOULS: WTB Ranger TCS Light / Fast Rolling, 29x2.25 "
TIPS: Sapim Race, Stainless Black
WEIGHT: 11.4kg (MY20 weight)
WEIGHT LIMIT: 115kg
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano SLX, Shimano Deore |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 114110 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
