Rock Machine Blizz 40-27+, 2018 model
Stroke: 130 mm
Fork: SR Suntour XCR 34 LO, Tapered, 15 mm Boost, Coil spring/hydraulic lock-out
Cranks and shifters: SR Suntour Zeron-S Boost 32T
Center composition: Shimano BB-MT500-PA
Derailleur: SRAM NX Long Cage
Shifting: SRAM NX Trigger Shifter
Cassette: SRAM PG-1130-11 11-42T
Chain: KMC X11
Brakes: Shimano BR-M365 hydraulic disc brake 180/180 mm
Head composition: FSA No.9/No.7B
Stem: Alloy 35 mm
Handlebars: Alloy 35 mm riser
Grips: One1 MTB Lock-on
Seatpost: Zoom Alloy
Saddle: RM Peak Race
Front hub: Shimano HB-M6010-B 15×110 mm
Rear hub: Shimano FH-M6010-B 12×148 mm
Rims: WTB Scraper i35 32H
Tip : Sapim Black
Tires: WTB Vigilante TCS LHG / Trail Boss TCS LFR 27.5×2.65"
Weight: 13.8 kg (size 18" - L)
Model year | 2018 |
Gears | 1x11 |
Groupset | SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 94639 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews