Mondraker Podium Carbon R 29 bike, translucent blue carbon/marlin blue
Mondraker Podium Carbon R 29 bike
Frame |
Podium 29 Stealth Air Carbon, XC Forward Geometry, BSA bottom bracket, tapered head tube, HHG internal cable routing, Boost 12x148 mm rear axle, dedicated 1X drivetrain design, Flatmount brake compatible,
|
Fork |
Fox 32 Step Cast Float FIT4 EVOL Factory Kashima, 100 mm, tapered steerer tube, 15x110 mm Boost axle, remote lockout, offset 44 mm. Settings: lockout, compression micro-adjustment at low-speed, rebound, air preload
|
Shifting |
SRAM Trigger GX Eagle, 12s, X-Actuation 1:2
|
Derailleur |
Sram X01 Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:2
|
Cassette |
Sram XG-1275, 10-50T, 12s
|
Chain |
SRAM SX Eagle, 12s, Powerlock
|
Cranks |
Truvativ Stylo Carbon Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm
|
Brakes |
SRAM Level TLM Disc, 160/160 mm Centerline Rotor
|
Rims |
Mavic Crossmax Carbon SL R 29, 26 mm internal width, hookless, tubeless ready, 24 spokes
|
Front hub |
Mavic, Boost 15x110 mm, IS 6 bolts
|
Rear hub |
Mavic, Boost 12x148 mm, ID360 Ratched system, IS 6 bolts, XD freehub
|
Spokes |
Mavic straight pull double butted, contactless lacing
|
Tires |
Maxxis Rekon Race 29x2.35" EXO protection, tubeless ready, 120 TPI, folding bead
|
Seat post |
Onoff Helium Carbon 0-R VFLEX, diameter 27.2 mm, length 400 mm
|
Saddle |
Fizik Antares R7
|
Stem |
MDK, 6061 T6 Alloy, 31.8 mm barbore, rise: +/-5º, length: sizes S/M: 60 mm, size L: 70 mm, size XL: 80 mm
|
Handlebars |
Onoff Helium Carbon 0.2, rise: 4.8 mm, width: 760 mm, 9º backsweep, 0º upsweep, 31.8 mm barbore
|
Headset |
Onoff Titan tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41.8x30.5x8x45ºx45º, bottom 51.9x40x8x45ºx45º
|
Bottom bracket |
SRAM DUB BSA, sealed bearings, 73 mm
|
Sex | Men, Unisex |
Model year | 2022 |
Gears | 1x12 |
Groupset | Other |
Size | S, M, L, XL |
Weight | 8.9 kg |
Colour | translucent blue carbon/marlin blue |
Material | carbon fiber |
Wheel material | Carbon |
Wheel diameter | 29" |
Brakes | Hydraulic disc brakes |
Fork | Air |
Fork travel | 100 mm |
product ID | 191860 |

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews