Mondraker Chrono R 29 (SPE) bike, british racing green/öhlins yellow
Bike fitting discount 20 % (you will save 28 €)
Mondraker Chrono R SPE 29 bike
Illustrative photo - different fork.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Air fork
The best option in terms of weight and comfort. Provides more adjustment options (rebound, compression). Requires regular service - the service cycle is specified by the manufacturer.
29” wheels
The advantage is better terrain passability, better rolling and traction. However, they are heavier, which also applies to tires.
| Frame |
Chrono 29 6061 Xtralite Alloy butted, XC Forward Geometry, 73 mm BSA bottom bracket, tapered head tube, HHG Internal Cable Routing, Boost 12x148 mm rear axle
|
| Fork |
Fox 32 29 Float FIT GRIP EVOL Rhythm, 100 mm, tapered steerer tube, Boost 15x110 mm axle, offset 44 mm. Settings: remote 2pos Push-unlock, low-speed rebound, air preload. Fox single pull
|
| Shifting |
Sram Trigger SX Eagle, 12s, X-Actuation 1:1
|
| Derailleur |
SRAM GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
|
| Cassette |
SRAM PG-1210, 11-50T, 12s
|
| Chain |
SRAM SX Eagle, 12s, Powerlock
|
| Crankset |
Truvativ Stylo 6K Eagle, 12s, Boost, DUB axle, Direct Mount chain ring, S size: 170 mm, M/L/XL size: 175 mm
|
| Brake levers |
Sram Level TL, Direct Link actuation, tooled reach adjust, lever pivot bushings
|
| Rims |
MDK-XP1 29 TLR, 25 mm internal width, tubeless ready, 32 spokes
|
| Front hub |
Formula DC711, Boost 15x110 mm, sealed bearings, IS 6 bolts
|
| Rear hub |
Formula MST148S-4SB, Boost 12x148 mm, sealed bearings, IS 6 bolts
|
| Spokes |
CN round stainless steel
|
| Tires |
Maxxis Ikon 29x2.20, 60TPI, wire bead. Maxxis Ikon 29x2.20, 60TPI, wire bead
|
| Seat post |
Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 27.2 mm, length 400 mm
|
| Saddle |
Mondraker XC Series, steel rail
|
| Stem |
Onoff Sulfur, 6061 T6 Alloy, 31.8 mm barbore, rise: +/-7º, length: sizes S/M: 60 mm, size L: 80 mm, size XL: 90 mm
|
| Handlebars |
Onoff Sulfur 0.2, double butted 6061 alloy, rise: 4.8 mm, width: 740 mm, 9º backsweep, 0º upsweep, 31.8 mm barbore
|
| Headset |
Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
|
| Bottom bracket |
SRAM DUB BSA, sealed bearings, 73 mm
|
| Sex | Men, Unisex |
| Model year | 2022 |
| Gears | 1x12 |
| Groupset | SRAM GX, SRAM SX |
| Size | S, M, L, XL |
| Weight | 12.5 kg |
| Colour | british racing green/öhlins yellow |
| Material | aluminium |
| Wheel material | Aluminium |
| Wheel diameter | 29" |
| Brakes | Hydraulic disc brakes |
| Fork | Air |
| Fork travel | 100 mm |
| product ID | 191905 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale -30% Leatt Endurance 6.0 Clip-in clipless pedals, black
107 €
-30%
RRP 169 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews