Lapierre Prorace 5.9, model 2021
Discover the cross-country racing world with Lapierre Prorace models
The frame with modern racing geometry from the patented lightweight Supreme 5 alloy with the Boost standard, 29-inch wheels and a mix of carefully selected components make the Lapierre Prorace 5.9 fast, powerful and affordable hardtails.
Lapierre Prorace 5.9 - whether you are a beginner or an experienced rider, you will appreciate the excellent efficiency during the ascent and easy handling on the descents.
Category: MTB Hardtail
Year: 2021
Wheel size: 29 "
Frame: PRORACE 29 "SUPREME 5 ALLOY DISC, BOOST, PRESSFIT, THRU AXLE 12x148 INT BRAKE RR
Fork: FOX 32 Rythm FLOAT 100mm BOOST + REMOTE
Derailleur: SHIMANO Deore XT 12spd
Cranks: SHIMANO DEORE FCM-511 170mm / 32T (XS, S), 175mm / 32T (M, L, XL)
Middle composition: Shimano PF MTB92
Cassette: Shimano Deore 12spd 10-51T (CSM6100)
Chain: SHIMANO DEORE 12spd
Brakes: SHIMANO MT401 WITH J-KIT
Head composition: FSA ORBIT 1.5Z SC NO.57SC
Handlebars: Lapierre 6061 TOP FLAT W: 720mm Ø: 31.8mm
Grips: PRE FOAM GRIPS
Stem: Lapierre ALLOY 3D FORGED 7 ° Ø: 31.8mm L: 60mm (XS, S) / 70mm (M, L) / 80mm (XL)
Seatpost: Lapierre ALLOY FORGED Ø: 27.2mm L: 400mm
Saddle: Lapierre by VELO
Front hub: SHIMANO MT400
Rear hub: SHIMANO MT410 - Microspline
Pedals: NW 91K steel cage
Wheels: SHIMANO SMRT30 180mm / 160mm CENTER LOCK
Front fork stroke: 100
Model year | 2021 |
Gears | 1x12 |
Groupset | Shimano XT, Shimano Deore |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 120955 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews