Kellys Madman 30 Black 27.5 ", model 2019
frame size 445mm (S) / 495mm (M) / 545mm (L)
fork SR SUNTOUR XCT HLO, (27.5 "), 100mm, coil / Speed Lockout
main composition semi-integrated
medium cartridge composition (122mm)
cranks SHIMANO FC-TY301 (42x34x24) - length 170mm (S), 175mm (M -L)
shifting SHIMANO ST-EF510-8 EZ-fire Plus
derailleur SHIMANO Tourney TY700 (31.8mm)
SHIMANO Altus M310 inverter (direct mount)
number of transfers 24
cassette pinion SHIMANO CS-HG200-8 (12-32)
KMC Z8 chain (108 links)
brakes C-Star CX7 Mechanical Disc
brake discs front 160mm / rear 160mm
brake levers SHIMANO ST-EF510-8 EZ-fire Plus
brake cables DRIVING Force SCS (SlickCableSystem)
KLS Firework Disc cartridges (32 holes)
rims KLS Draft Disc 584x19 32 holes
string steel
tires IMPAC Ridgepac 54-584 (27.5x2.10)
stem KLS Active - diam 28.6mm / bar bore 31.8mm / 8 ° / length 75mm (S - M), 90mm (L)
handlebars KLS Active RiseBar - diam 31.8mm / width 660mm (S), 680mm (M - L)
KLS Advancer handles
seatpost KLS Active - diam 27.2mm / length 350mm (S), 400mm (M - L)
KLS DriveLine saddle
KLS alloy pedals
Model year | 2019 |
Gears | 3x8 |
Groupset | Shimano Altus, Shimano Tourney |
Material | aluminium |
Brakes | Mechanical disc brakes |
product ID | 68886 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews