Kellys Hacker 90, model 2016
frame size S / M / L
fork FOX 32 Float Factory - Kashima Coat (27.5), 100mm, air / FIT4 / 3-Position Remote: Open-Medium-Firm / Open Mode Adjust / 15QR thru axle
main composition FSA 1.5 integrated
middle composition SHIMANO Press-Fit BB71-41A
handles SHIMANO XTR M9000-1 Hollowtech II (34) - length 170mm (S), 175mm (M - L)
shifting SHIMANO XTR SW-M9050-R Di2 Firebolt (rear) / SI Display SC-M9050
SHIMANO XTR M9050 Di2 converter (direct mount)
number of transfers 11
cassette pinion SHIMANO CS-M8000-11 (11-42)
chain SHIMANO CN-600-11 (116 links)
brakes SHIMANO XTR M9020 Hydraulic Disc
brake discs front 160mm / rear 160mm
SHIMANO XTR BL-M9020 brake levers
fixed axle front FOX 15QR 15x100mm / rear SHIMANO AX78 12x142mm
tangled wheels CRANKBROTHERS Cobalt 2 (27.5)
tires SCHWALBE Racing Ralph Performance 57-584 (27.5x2.25) folding
stem CRANKBROTHERS Cobalt 3 - diam 28.6mm / bar bore 31.8mm / 6 ° / length 80mm (S), 90mm (M), 110mm (L)
handlebars CRANKBROTHERS Cobalt 3 RiseBar - diam 31.8mm / width 680mm (S), 720mm (M - L)
CRANKBROTHERS Cobalt handles
seatpost CRANKBROTHERS Cobalt 3 - diam 30.9mm / length 350mm (S), 400mm (M - L)
saddle fi´zi: k Gobi M5 Manganese
pedals SHIMANO M520 SPD (footprints)
Model year | 2016 |
Gears | 1x11 |
Groupset | Shimano XTR, Shimano XT |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 15805 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews