Fuji Tahoe 29 1.5 Green, model 2019
Fork: RockShox Judy Silver TK 29 Solo Air w / remote lockout, tapered alloy steerer, Boost 110x15mm, 100mm
Cranks: SRAM NX, 32T
Middle composition: SRAM Power spline, threaded
Derailleur: SRAM NX
Gearing: SRAM NX trigger, 1 x 11-speed
Cassette: SRAM PG1130, 11-42T
Chain: KMC X11
Wheels: WTB ST i25 TCS 29 "" 32H rims, Formula DC-711 front hub, DHT-148S rear hub, stainless black spokes
Tires: Maxxis Ikon, 29 "x 2.2", 60tpi, folding
Brakes: SRAM Level, 180 / 160mm rotors
Brake levers: SRAM Level
Head composition: FSA 1 1/8 "" - 1.5 "", sealed bearings
Handlebars: Oval Concepts flat bar, alloy, 9 degree sweep, 710mm
Stem: Oval Concepts 313, alloy, +/- 7 degree
Grips: Fuji Performance Grip Lock On
Saddle: WTB Silverado Sport
Seatpost: Oval Concepts 300, alloy, 30.9mm
Weight: 13.37 kg / 29.48 lbs
Model year | 2019 |
Gears | 1x11 |
Groupset | SRAM NX |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 78201 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews