FELT Dispatch 9/60 blue, model 2018
Fork: SR Suntour XCM-HLO, hydraulic lockout
Stroke: 100 mm
Shifting: Shimano Acera M3000, 3x9
Derailleur: Shimano Acera M3000
Derailleur: Shimano Deore M592, 9 speeds
Cassette: Sunrace SCM96, 11-36 teeth
Chain: Sunrace M94
Cranks: Shimano Acera M371, 44/32/22, (XS/S - 170mm, M/XL - 175mm)
Headstock: FSA NO.10, 1.125", semi-integrated
Stem: Devox, +/-7°, (XS - 50mm, S/M - 60mm, L/XL - 70mm)
Handlebars: Devox, 6061 alu, 720mm
Brakes: Shimano M315, hydraulic, 180/160 mm
Brake levers: Shimano
Rims: Alu
Tires: Schwalbe Rapid Rob, 29" x 2.25"
Seatpost : Devox 6061 alu, 15mm offset, (XS/S – 27.2x350mm, M/XL – 27.2x400mm)
Seat: Felt MTB performance
Model year | 2018 |
Gears | 3x9 |
Groupset | Shimano Deore, Shimano Acera |
product ID | 77358 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews