Amulet Maniac 29 "mountain bike 2018
29 "sports mountain bike with light aluminum frame, Suntour XCR Air air fork, hydraulic disc brakes and Shimano 1x10 set.
Amulet Maniac 29 is a sports mountain bike designed for riding light and medium-difficult terrain. As such, it will serve perfectly on your daily trips, and if your ambitions are higher, it will not disappoint you even in races. The lightweight aluminum frame made of three times weakened tubes, together with the Suntour XCR Air LO-R front air fork, guarantees you a fast and comfortable ride easily without any disturbing elements. The fork works with a stroke of 100 mm, of course there is the possibility of full locking.
The single-gear cranks Race-light Big-AX is complemented by a ten-speed Sunrace cassette with a range of 11-42 teeth, the chain is shifted by pinions by a Shimano Deore M6000 rear derailleur with a long arm. Shimano o M315 hydraulic disc brakes with 160 mm diameter steel discs at the front and rear always guarantee a safe stop. Adhesion on smooth and rough surfaces is guaranteed by the versatile CST Wolta tires with a width of 2.1 ".
Frame: Amulet QCG3 29 TB 6061
Fork: SR Suntour XCR Air LO-R, air, 100 mm
Cranks: Race-light Big-AX, 34 teeth, 175 mm
Center composition: Shimano SM-BB52
Derailleur: Shimano RD-M6000 Deore
Gear levers: Shimano SL-M6000 Deore, 1x10
Cassette: Sunrace, 11-42 teeth
Chain: Shimano HG54
Brakes: Shimano M315, 160 / 160mm
Brake Levers: Shimano M315
Rims: Race-light 29 DW, 32 holes
Hubs: Shimano RM35
Tires : CST Wolta, 29x2.1 "
Pedals: Alloy
Handlebars: Race-light, 740 mm
Stem: Race-light Sport
Head composition: Neco Integrated
Saddle: Race-light
Seatpost: Race-light, 31.6 mm
Model year | 2018 |
Gears | 1x10 |
Groupset | Shimano Deore |
product ID | 77808 |
The size table is indicative, the exact measurements and geometry of the models can be found on the manufacturer's website.

All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews