Marin Stinson 1 27.5 bike, blue/orange/gray
Choose personal pickup at the store and decide on the spot.
Marin Stinson 1 27.5 bike
| Frame |
Series 1 Comfort, 6061 Aluminum, 27.5” Wheels, Disc Specific, Comfort Control Geometry, Kickstand Mount, Fender and Rack Mounts
|
| Fork |
CrMo Steel, Straight Blade, Disc Specific, Fender and Rack Eyelets
|
| Shifting |
Shimano Altus 7-Speed RapidFire
|
| Derailleur |
Shimano Tourney, 7-Speed
|
| Cassette |
SunRace 7-Speed, 11-34T
|
| Chain |
KMC Z8
|
| Crankset |
Alloy Crank, Steel 38T Chainring, Ring Guard
|
| Brakes |
Power CX7 Mechanical Disc, Shimano Pad Compatible, 160 mm Rotor
|
| Brake levers |
Shimano w/ Integrated Shifters
|
| Rims |
Marin Aluminium Double Wall, Disc Specific
|
| Front hub |
Forged Aluminum, 32H, Disc Specific
|
| Rear hub |
Forged Aluminum, 32H, Disc Specific
|
| Spokes |
14g Stainless Steel
|
| Tires |
Vee Tire Co. Speedster, 27.5”x2.35”, Puncture Protection
|
| Seat post |
Marin Alloy, 30.9 mm
|
| Saddle |
Marin Comfort
|
| Stem |
Marin Alloy
|
| Handlebars |
Marin Alloy, 25 mm Rise, 18˚ Backsweep
|
| Grips |
Marin Adventure
|
| Headset |
FSA, TH No.10P
|
| Bottom bracket |
Sealed Cartridge Bearings, Square Taper
|
| Pedals |
Marin Comfort Platform
|
| Sex | Men, Unisex |
| Model year | 2024 |
| Gears | 1x7 |
| Groupset | Shimano Altus, Shimano Tourney |
| Size | S, M, L, XL |
| Colour | blue/orange/grey |
| Material | aluminium |
| Wheel diameter | 27.5" |
| Brakes | Mechanical disc brakes |
| Fork | Rigid |
| product ID | 287214 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.

There are currently no reviews