Marin San Anselmo DS3 28 women's bike, burgundy
Choose in-person pick-up at the store and decide on the spot.
Marin San Anselmo DS3 28 women's bike
Suitable not only for commuting, but also for occasional trips outside the city of a sports/recreational spirit. Enjoy cycle paths and paved roads during the weekend. If you want to ride frequently, you will need to do more fine-tuning.
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Hydraulic disc brakes
Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.
Coil fork
Provides adequate comfort and is usually installed on bicycles for recreational and less demanding riding. The disadvantage is its relatively heavy weight.
28” wheels
Often marked as 700c. They usually have a narrower profile, lower weight and high stiffness. They are the standard, especially for road (CX, gravel), trekking, city and cross-country bikes.
| Frame |
Series 3 6061 Aluminium w/ SHOT Tech, Women's Fit Geometry, Relieved Head Tube and BB, Internal Cable Routing, Post Mount Disc
|
| Fork |
SR Suntour NCXD LO, Hydraulic Lockout, Adjustable Damping, 63 mm Travel
|
| Shifting |
Shimano Altus 9-Speed
|
| Derailleur |
Shimano Alivio Shadow
|
| Front derailleur |
Shimano Altus
|
| Cassette |
Shimano Alivio 9-Speed, 12-36T
|
| Chain |
KMC X9
|
| Cranks |
SR Suntour XCR6, 48/36/26T, Ring Guard
|
| Front brake |
Tektro Auriga WS Hydraulic Disc, 160 mm Rotor
|
| Rear brake |
Tektro Auriga WS Hydraulic Disc, 160 mm Rotor
|
| Brake levers |
Tektro Auriga WS Hydraulic w/ Women's Fit Levers
|
| Rims |
Maddux Double Wall, Machined Sidewall
|
| Front hub |
Formula, 6-Bolt Disc, 32H
|
| Rear hub |
Formula, 6-Bolt Disc, 32H
|
| Spokes |
Black Stainless Steel
|
| Tires |
Schwalbe Smart Sam Performance, 700x40C, Puncture Protection
|
| Seat post |
Marin Alloy
|
| Saddle |
Marin Women's Fitness
|
| Stem |
Marin Alloy
|
| Handlebars |
Marin Riser
|
| Grips |
Marin Ergonomic Locking
|
| Headset |
FSA No.10-P
|
| Bottom bracket |
Sealed Cartridge Bearing, Square Taper
|
| Pedals |
Resin Platform
|
| Sex | Women |
| Model year | 2016 |
| Gears | 3x9 |
| Groupset | Shimano Alivio, Shimano Altus |
| Size | XL |
| Colour | burgundy |
| Material | aluminium |
| Wheel diameter | 28" |
| Brakes | Hydraulic disc |
| Fork | Spring |
| Fork travel | 63 mm |
| product ID | 147814 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packaged back into a box and shipped
- If you order a bike for in-person pick-up or home delivery, the bike will be waiting for you assembled and checked
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seat post to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tires or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
All the answers to questions about delivery, payment, security, returns, warranty and much else.
Sale -50% Leatt Clip 2.0 Endurance women's cycling shoes, black
from 73.99 €
-50%
RRP 159 €
Clearance -29% fizik Vento Infinito Knit Carbon 2 Wide cycling shoes, black/black
from 269 €
-29%
RRP 379 €
Sale -21% Leatt ProClip 8.0 Race women's cycling shoes, black
from 189 €
-21%
RRP 259 €
savings Shimano SM-SH11 road cleats, 6° float, yellow
14.99 €
savings
RRP 21.99 €
-10% Marin set of rubber grommets for aluminium and steel frames
26.99 €
-10%
RRP 29.99 €
We are the largest cycling e-shop in Slovakia, verified by 100,000+ customers.
We are available via e-mail, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
arrow_outward
There are currently no reviews