Marin Lombard
Marin Lombard 2017
Frame: Aluminum frame, Integrate headest, QR rear hub spacing, BSA bottom bracket
Fork: Force Cross Al 28
Head composition: Force 1.1 / 8, sealed cartridge bearing, red
Brakes: Promax Render mechanical
Wheels: Promax 160mm
Levers: Shimano Sora 3x9
Derailleur: Shimano Sora 9sp long arm
Derailleur: Shimano Sora
Cranks: Shimano Sora 50-39-30 175mm
Cassette: Sunrace 11-32
Chain: KMC X9
Wheels: Marin, 32 spokes, cone hubs, aluminum rims
Tires: Schwalbe Road Cruiser Active line Kevlar guard
Handlebars: Marin 31.6mm, 440mm
Stem: Marin 31.6mm, 110mm
Seatpost : Marin 27.2mm, 350mm
Saddle: Marin 164mm
Saddle clamp: Marin 31.8mm
Size: 60cm
Aluminium frame
Lighter, relatively durable and stiff material that is affordable. The most widespread material for the production of bicycle frames.
Mechanical disc brakes
Safer and more efficient braking even in wet and muddy conditions. Exerting more force on the lever for a higher braking effect. The cable may be subject to corrosion. Heavier weight.
| Model year | 2017 |
| Gears | 3x9 |
| Groupset | Shimano Sora |
| Material | aluminium |
| Brakes | Mechanical disc brakes |
| product ID | 148915 |
MTB
| Size | S | M | L | XL |
|---|---|---|---|---|
| Height (cm) | 160 - 167.5 | 167.5 - 177.5 | 177.5 - 188 | 188 - 193 |
| Size (cm) | 49 | 52 | 54 | 56 | 58 | 60 |
|---|---|---|---|---|---|---|
| Height (cm) | 150 - 160 | 160 - 167.5 | 167.5 - 175 | 175 - 183 | 183 - 188 | 188 - 193 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.
-5% Pas Normal Studios Falconer Aero 2Vi MIPS helmet, off white
322 €
-5%
RRP 339 €
We are the largest cycling e-shop in Slovakia proven by 100,000+ customers.
We are available via email, online chat, phone or in person at our MTBIKER stores.
Thanks to your order we can support cycling development.
The payment process is safe and we offer you a wide range of options.
We will reward you for your purchase and also for quality contributions in the MTBIKER forum, e-shop, trips and photo gallery.
Visit our store with a pump-track and trail access or our showroom in a historical bulding in central Bratislava.
There are currently no reviews