Lapierre CX ALU 200 FDJ, model 2017
Frame: CX ALLOY SUPREME 6
Fork: LAPIERRE CARBON - Alloy Steerer
Derailleur: SHIMANO SORA FDR3000BL 34.9mm
Derailleur: SHIMANO SORA RDR3000GS 9-Speed
Converter: SHIMANO SORA FC3550CX64X 46x34 170mm (XS, S) / 172.5mm (M) / 175mm (L, XL)
Center composition: SHIMANO SMBB7141B PRESSFIT
Cartridge: SHIMANO CSHG4009132 - 9-Speed 11-32T
Brakes: TEKTRO CR510 BLACK
Gearing: SHIMANO SORA STR3000 2x9-Speed
Head composition: FSA ZS 4D 1''1 / 8 + 5.3mm Top cover
Handlebars: LAPIERRE HB-CR12 40mm (XS, S, M) / 42mm (L) / 44mm (XL)
Stem: LAPIERRE with LP cap 7 ° Ø: 31.8mm L: 90mm (XS, S) / 100mm (M) / 110mm (L) / 120mm (XL)
Seatpost: LAPIERRE SP-3D1 Ø: 31.6mm L: 350mm
Saddle: SELLE ITALIA X1 BLACK
Wheels and hubs: SHIMANO CLARIS HB2400BAL 32T - SHIMANO CLARIS FH2400BYBL 32T - MACH1 SPARKLER 700X17C
Tires: KENDA SLANT 6 700x35c
Model year | 2017 |
Gears | 2x9 |
Groupset | Shimano Sora, Shimano Claris |
Material | aluminium |
Brakes | V-brakes |
product ID | 30987 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews