Lapierre Crosshill 3.0 28 bike, gold
Lapierre Crosshill 3.0 28 bike
Frame |
CROSSHILL GRAVEL SUPREME 4 ALLOY
|
Fork |
Lapierre carbon blades, alloy steerer, 12 mm thru axle
|
Derailleur |
SHIMANO TIAGRA FD-R4700
|
Derailleur |
SHIMANO TIAGRA FD-R4700
|
Cassette |
Sunrace CSMS0 10s 11-34T
|
Cranks |
FSA OMEGA ADVENTURE MEGA EXO 46 / 30T, 170 mm- XS / SM, 172.5 mm -med, 175 mm-LG / XL
|
Brakes |
SHIMANO TIAGRA HYDRAULIC FLATMOUNT
|
Front hub |
Lapierre centerlock 32H 12 mm E-THRU AXLE
|
Rear hub |
Lapierre centerlock 32H 12 mm E-THRU AXLE
|
Seat post |
Lapierre ALLOY Ø: 27.2 mm L: 350 mm O / S: 12 mm
|
Saddle |
SELLE ROYAL VIVO CO BRANDED SADDLE
|
Stem |
Lapierre ALLOY Ø: 31.8mm R: 6 ° L: XS / SM = 90 mm, MED = 100 mm, LG = 110 mm, XL = 120 mm
|
Handlebars |
Lapierre ALLOY GRAVEL BAR 16DEG DROP FLARE XS / SM = 42 cm, MED = 44 cm, LG / XL = 46 cm
|
Grips |
Lapierre ELASTOMER TAPE BLACK/SHOCK PROOF, 3 mm THICK
|
Headset |
FSA ORBIT NO.57B SEMI-integrated
|
Bottom bracket |
FSA ROAD MEGA EXO
|
Pedals |
STEEL CAGE NW-91K
|
Disc brake rotors |
SHIMANO SM-RT30 160 mm centerlock
|
Sex | Men, Unisex |
Model year | 2021 |
Gears | 2x10 |
Groupset | Other |
Size | XS, S, M, L, XL |
Colour | gold |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Hydraulic disc brakes |
Fork | Rigid |
product ID | 120951 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews