Lapierre Crosshill 2.0 28 bike, green
Lapierre Crosshill 2.0 28 bike
Frame |
Crosshill gravel Supreme 4 alloy internal cable routing
|
Fork |
Lapierre carbon blades, alloy steerer, 12 mm thru axle
|
Shifting |
Shimano Sora ST-R3000 2x9s
|
Derailleur |
Shimano Sora FD-R3000
|
Derailleur |
Shimano Sora RD-R3000 9s
|
Cassette |
Sunrace CSM90 11-34T 9s
|
Chain |
KMC X9 silver/grey 114L 1/2"x11/128" with CL566R link
|
Cranks |
FSA Tempo Adventure 46-30T 170 mm (XS/S), 172.5 mm (M), 175 mm (L/XL)
|
Brakes |
Tektro MD-C510C flat mount mechanical Disc
|
Rims |
WTB ST i23 TCS 2.0 32H 700c 21-622
|
Front hub |
Lapierre, Center Lock 32H 12 mm E-thru axle
|
Rear hub |
Lapierre, Center Lock 32H 12 mm E-thru axle
|
Tires |
WTB Riddler 700x37c, Tan wall, Wire bead
|
Seat post |
Lapierre alloy, Ø: 27.2 mm, L: 350 mm, O/S: 12 mm
|
Saddle |
Selle Royal Vivo co-branded saddle
|
Stem |
Lapierre alloy, 6°, Ø: 31.8mm, L: 90mm (XS/S), 100mm (M), 110mm (L), 120mm (XL)
|
Handlebars |
Lapierre alloy gravel bar, Width: 420 mm (XS/S), 440 mm (M), 460 mm (L/XL), Flare: 16°
|
Bar tape |
Lapierre elastomer tape black, shock proof, 3 mm thick
|
Sex | Men, Unisex |
Model year | 2023 |
Gears | 2x9 |
Groupset | Shimano Sora |
Colour | green |
Material | aluminium |
Wheel material | Aluminium |
Wheel diameter | 28" |
Brakes | Mechanical disc brakes |
Fork | Rigid |
product ID | 228335 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews