GT GTR Elite 2019 road bike
Fork: All-New GTR Full Carbon fork, 1 1/8 to 1 1/4" tapered, flat mount disc, 12mm thru axle
Cranks: FSA Tempo, 50/34
Central composition: Sealed Cartridge
Derailleur: Shimano 105
Derailleur: Shimano 105, 31.8 clamp
Shift levers: Shimano 105, 2x11
Cassette: Shimano 105, 11-32, 11-speed
Chain: KMC X11, 11-speed
Brakes: TRP HY / RD cable actuated hydro disc, 160 / 160mm
Brake levers: Shimano 105
Rims: Alex ATD470, tubeless compatible
Hubs: Formula RX-512 12x100 front, DC142 QR rear
Wires: Stainless Steel, 14g
Tires: Vittoria Rubino Pro, 700 x 28c
Pedals: Low Profile Nylon w/ Toe Clips
Handlebars: GT DropTune, Double-butted 6061 Alloy bar
Stem: GT Design, 3D forged 6061 Alloy, 4 bolt face plate, 31.8, 7 °
Head composition: Integrated, Sealed bearing
Saddle: GT road saddle
Seatpost: GT Alloy, 27.2 x 300mm
Color: Gloss Black & Teal W / Teal, Orange & Tangerine (BLK)
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 73459 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews