GT Grade Expert 2019 road bike
Fork: Grade Carbon 1 1/8 to 1 1/4" Threadless alum steerer, disc specific
Cranks: FSA Vero Compact 50alloy / 34alloy
Central composition: Sealed Cartridge
Shift levers: Shimano 105, 2x11
Cassette: Shimano 105 11-32, 11-speed
Chain: KMC X11, 11-speed
Derailleur: Shimano 105
Derailleur: Shimano 105
Rims: Alex ATD470, tubeless compatible
Hubs: Formula Ultralight 6 bolt disc sealed front, Formula Ultra light 6 bolt disc sealed cassette rear
Pedals: Low Profile Nylon w/ Toe Clips
Brakes: TRP HY / RD cable actuated hydro disc, 160 / 160mm
Stem: GT Design 3D forged 6061, 4 bolt face plate 7 ° Rise, 31.8mm Clamp
Head composition: Integrated TH Sealed bearing
Handlebars: New GT DropTune Super Light Double-butted 6061 alloy bar with 16degree flair
Brake levers: Shimano 105
Wires: Stainless Steel, 15g
Tires: WTB Exposure, 700 x 32c, Wire Bead
Saddle: GT Grade saddle
Seat post : One bolt aluminum
Sizes: 48, 50, 51, 53, 55, 56, 58, 60
Color: Gloss Slate Blue W / Red and Black (SLA)
Model year | 2019 |
Gears | 2x11 |
Groupset | Shimano 105 |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 73318 |
Size | XS | S | M | L | XL |
---|---|---|---|---|---|
Rider height (cm) | 142.24 - 152.40 | 152.40 - 165.10 | 165.10 - 177.80 | 177.80 - 185.42 | 185.42 - 198.12 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews