Giant TCX Advanced Pro 0, model 2021
Color: Carbon / Chameleon Neptune / Chrome
Frame: Advanced-Grade Composite, 12mm thru-axle, disc
Fork: Advanced-Grade Composite, full-composite OverDrive 2 steerer, disc
Shock absorber: -
Handlebars: Giant Contact SLR, composite
Representative: Giant Contact SL
Seatpost: Giant D-Fuse SLR, composite
Saddle: Giant Fleet SL, composite base, SST rails, UniClip accessory mount
Pedals: -
Gearing: SRAM Force stage AXS, 1x
Derailleur: -
Derailleur: SRAM Force stage AXS
Brakes: SRAM Force stage AXS hydraulic (F: 160mm, R: 140mm)
Brake levers: SRAM Force etap AXS hydraulic
Cassette: SRAM Force, 12-speed, 10x33
Chain: SRAM Force D1, 12-speed
Cranks: SRAM Force D1 OAK, 38T
Middle composition: SRAM OAK, press fit
Rims: Giant SLR-1 Carbon Disc WheelSystem, 42mm
Hubs: Giant SLR-1 Disc WheelSystem, 12mm thru -axle
Wires: Giant SLR-1 WheelSystem, DBL technology
Tires: Maxxis All-Terrena, tubeless, 700x33c
Accessories: preparation for tubeless operation
Model year | 2021 |
Gears | 1x12 |
Groupset | SRAM Force |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 118183 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pickup or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews