Fuji Altamira CX 1.3 Satin Bright Green, model 2020
Fork: FC-330 Cross carbon monocoque, 12mm thru-axle with flat-mount disc system, tapered steerer
Cranks: SRAM Rival 1, 42T
Middle composition: SRAM, PF30
Derailleur: SRAM Rival 1
Gears: SRAM Rival, DoubleTap Hydraulic, 11-speed
Cassette: SRAM PG-1130, 11-32T
Chain: KMC X11 with MissingLink
Wheels: Oval Concepts 324 Disc, Centerlock hubs, 100x12mm & 142x12mm thru Axles, 700c 24 / 28H rims
Tires: Vittoria Terreno Mix, 700x33, 120 tpi, folding, TNT tubeless ready
Brakes: SRAM Rival Hydraulic disc for road, 160mm rotors
Brake levers: SRAM Rival, DoubleTap Hydraulic
Head composition: FSA, 1 1/8 upper - 1 1/2 lower, integrated with carbon top cover
Handlebars: Oval Concepts 310 Ergo, 6061 alloy, 31.8mm clamp, 133mm drop, 4 sweep
Stem: Oval Concepts 313, 3D-forged 6061 stem points, 7
Grips: Anti-Slip Silicone
Saddle: Oval Concepts X38 with pressure relief zone, cromo rails
Seatpost: Oval Concepts 905, carbon & alloy, 27.2mm diameter
Weight: 8.93 kg
Model year | 2020 |
Gears | 1x11 |
Groupset | SRAM Rival |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 78095 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews