Cannondale SuperSix Evo SE CMT
The SuperSix has always been synonymous with speed. Therefore, this designation is also reflected in the class of cyclocross special, which thanks to the new frame brings even more speed to this world.
The new SuperSix Evo CX and SE have a shorter rear construction and aerodynamic elements guaranteeing not only high speed, but also safety and control over the bike in every situation.
The permeability of the tires up to 45 mm allows you to increase the comfort parameter and improve the resistance to snapping.
OutFront geometry guarantees maximum traction and the most efficient transmission of the force you expend to the pedals.
The Sram Rival AXS set is a sure bet if you require correct, fast and trouble-free placement in every situation. 2x12 gears then provide you with a wide range of gears.
DT Swiss CR-1600 Spline entwined wheels are a durable and lightweight variant which, in combination with Vittoria Terreno Dry TNT tires, ensures lightning-fast acceleration and traction even in the largest mud.
Frame: SuperSix EVO CX Carbon, internal cable routing w / Switchplate, 12x142mm Speed Release thru-axle, SAVE, PF30-83 Ai, flat mount disc, integrated seatpost binder
Fork: SuperSix EVO CX Carbon, SAVE, integrated crown race, 12x100mm Speed Release thru-axle, flat mount disc, internal routing, 1-1 / 8 "to 1-1 / 2", 55mm offset
Cranks: SRAM Rival DUB X-Range, 46/33
Middle composition: SRAM OAK PF30A Road 83mm, Cannondale Ai
Gear levers: SRAM Rival eTap AXS HRD
Cassette: SRAM Rival XG-1250, 12-speed 10-36
Chain: SRAM Rival 12-speed
Derailleur: SRAM Rival eTap AXS, braze-on
Derailleur: SRAM Rival eTap AXS
Rims: DT Swiss CR-1600 SPLINE, 25h, tubeless ready
Hubs: (F) DT Swiss 350, straightpull, 12x100mm centerlock / (R) DT Swiss 350 with Ratchet System 18, straightpull, 12x142mm Ai centerlock
Brakes: SRAM Rival hydraulic disc, 160 / 160mm Paceline rotors
Stem: Cannondale 2, 6061 Alloy, 31.8, 7 °
Head composition: Integrated, 1-1 / 8 "- 1-1 / 2"
Handlebars: Cannondale 2, 6061 alloy, Compact
Brake levers: SRAM Rival hydraulic disc
Tip: DT Swiss Aero Comp straightpull (Ai Offset Dish - Rear)
Tires: Vittoria Terreno Dry TNT, 700 x 40c, tubeless ready
Saddle: Fizik New Aliante R5, 150mm width, S-alloy rails
Seatpost: HollowGram 27 SL KNØT, Carbon, 2 bolt clamp, 330mm, 0mm offset (46cm), 15mm offset (51-58cm)
Color: Cool Mint (CMT)
Model year | 2022 |
Gears | 2x12 |
Groupset | SRAM Rival |
Material | carbon fiber |
Brakes | Hydraulic disc brakes |
product ID | 141313 |
Mountain, city, cross-country
Size | Rider height |
---|---|
XS | 147-160 cm |
S | 157-170 cm |
M | 165-177 cm |
L | 175-187 cm |
XL | 182-195 cm |
XXL | 193-205 cm |
Size | Rider height |
---|---|
44 | 154-160 cm |
48 | 160-170 cm |
51 | 165-175 cm |
54 | 170-180 cm |
56 | 177-185 cm |
58 | 182-193 cm |
61 | 190-200 cm |
Size | Rider height |
---|---|
Uni | 139-190 cm |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews