Rock Machine CrossRide 500 HD, model 2018
With the Rock Machine Crossride 500 cross bike with hydraulic brakes, you can also enjoy demanding cycling tours. The Crossride 500 bike has a carefully designed geometry for a more upright seat and components selected for maximum comfort and reliability.
Until the new 2018 season, we have applied the new Sharkspine EVO design to the Heatwave, Catherine & Crossride 500 models as well. One of the key features of the Sharkspine EVO design is the ability to reduce the number of frame sizes due to the low position of the upper frame tube at the joint with the seat tube. Thanks to the correct cockpit length and a simple reduction in seat height, even bikers with a smaller figure no longer have to choose extremely small frame sizes.
We wish you a pleasant experience on the Crossride 500 bike!
Specification:
Frame: Alu 6061.T6 Multibutted EVO
Stroke (P / Z mm): 63 mm
Fork: SR Suntour NEX-DS HLO
Suspension / damping system: Coil spring / hydraulic lock-out
Crankshafts with converters: Shimano Nexave FC-M3010 48/38 / 28T
Front derailleur: Shimano Acera FD-T3000
Rear derailleur: Shimano Deore RD-M592 SGS Shadow
Gear levers: Shimano Acera SL-M3000 RapidFire Plus
Cassette: Shimano HG200-9 11-32T
Chain: KMC X9
Brakes: Shimano BR-M365 hydraulic disc brake 160/160 mm
Center composition: Cartridge CH51 Square system
Head composition: FSA No.10 Semi-Cartrige
Pedals: Marwi SP-610
Front hub: Shimano HB-TX505 CL QR
Rear hub: Shimano FH-TX505 CL QR
Rims: Weinmann U28 Disc Sport 32H
Spike : Sapim Leader
Tires / tubes: Schwalbe Silento 700 × 35C Kevlar Guard
Stem: ONE Sport OV 31.8 mm
Handlebars: ONE Sport flat
Handles: Ergo Lock-on dual density kraton-gel
Seatpost: ONE Sport SL
Saddle: Selle Royal 3050 hrn
Number of transfers: 3 × 9
Sizes: 18 "(M) 20" (L) 22 "(XL)
Weight: 14.4 kg / 20 "
Model year | 2018 |
Gears | 3x9 |
Groupset | Shimano Deore, Shimano Acera |
Material | aluminium |
Brakes | Hydraulic disc brakes |
product ID | 51331 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews