Rock Machine CrossRide 50, model 2018
Not everyone feels the need to overcome obstacles and pitfalls of the terrain on a bicycle. Many people fell in love with cycling for the pure joy of movement in nature. It is for them that the Cross model series is intended, with a carefully designed upright geometry for maximum driving comfort and easy control, complemented by reliable components. So are the Rock Machine cross bikes.
Specification:
Frame: Custom Alu 6061.T6
Fork: Hi-ten rigid
Cranks with gears: Shimano FC-TY301 48/38/28T
Front derailleur: Shimano FD-TY510
Rear derailleur: Shimano RD-TY500D
Shift levers: Shimano SL-RS35 Revoshift
Cassette: Shimano TZ21-7 14-28T Freewheel
Chain: KMC Z50
Brakes: Saccon Alloy V-brake
Middle composition: Thun Topaz
Head composition: CH919 BW
Pedals: Marwi SP-813 Non-Slip
Front hub: ONE KT QR
Rear hub: ONE KT QR
Rims: Weinmann X Star 19 Sport 32H
Spikes : Sapim Galvanized
Tires /tubes: Impac CrossPac 700×35C
Stem: Alloy 25.4 mm
Handlebars: Steel raised
Handles: Velo Ergo dual density kraton-gel
Seatpost: HL Corp Steel
Saddle: Selle Royal 3050 HRN
Number of gears: 3×7
Sizes: 18" (M) 20" (L) 22" (XL)
Weight: 14.4 kg / 20"
Model year | 2018 |
Gears | 3x7 |
Groupset | Other |
Material | aluminium |
Brakes | V-brakes |
product ID | 51330 |
All bicycles at the MTBIKER shop are new, not-ridden, from an official distributor and with a full warranty. Several brands even offer a lifetime warranty on the frame after registration. We perform all warranty services in MTBIKER stores after personal delivery or after sending the bike (or its part) by courier.
- The bicycle is taken out of the manufacturer's box
- The bicycle is assembled, inspected and adjusted (front and rear derailleur, shock, fork, wheels,...)
- The bicycle is carefully packed back into a box and shipped
- If you order a bicycle for in store pick up or home delivery, the bicycle will be waiting put together, checked and ready to use for you.
- If you order a bicycle via courier to your home address, the following must be done at home:
- Take the bike out of the box and carefully remove safety material and foils
- Mount handlebar to stem (1 minute, 4 or 5 mm hex hey is needed).
- Mount front wheel to fork (1 minute, without the need of any tools if the bike has a quick release).
- Loosen the screws in the headset, straighten the stem with the front wheel, tighten the upper screw on the fork and then tighten the headset (2 minutes, 4 or 5 mm hex key is needed).
- Mount the pedals to the cranks while lubricating the thread and carefully mounting it the right way (1 minute, 8 mm hex key or 15 mm wrench).
- Mount seatpost to frame (10 seconds, without needing any tools if the frame has a quick link).
- Inflate the tyres or fork and shock to desired pressure (2 minutes, pump needed).
- Check the tightening of hex keys and quick-releases (2 minutes, 4 and 5 mm hex key is needed).
- Go for a test drive! Handle your bicycle carefully until you get used to it. If the bike has disc brakes, their performance will be limited from now on - they will gain their full power after 4-5 strong brakes at higher speed.

There are currently no reviews